controller for Esk8 RSS

If can't pair MTSKR1905WF remote with our 300A ESC successfully, might has below reasons: 1. Please check if the receiver or ESC power (Internal receiver version) is always on. Before pairing, please make sure the receiver power or ESC (Internal receiver version) power is off first, then turn on the remote screen and "Pair" in main menu until 【Pairing...】shows on the screen, and then turn on the receiver or ESC (internal receiver version) power, remote will pair automatically in about 0.5 seconds.  2. Some customers all above pairing steps are correct, but still can't pair successfully, Why? Our 300A ESC...

Read more

When you received the MTSKR1905WF / MTSKR2005WF remote, firstly you need to connect receiver to your VESC / ESC, and pair the remote with receiver.  1. If you use VESC with built-in BEC, then just need to connect the throttle wire on ESC to receiver PWM port, receiver port definition as below, same as both MTSKR2005WF and MTSKR1905WF:      2. If you use OPTO without built-in 5V BEC, then you also need to add a 5V UBEC to power the receiver, wiring diagram as below:        3. After connected correctly, then do pair steps as below:  Firstly,...

Read more

Order random 5 motors from below 10 types motors, can get a free Esk8 remote (US$65.9/pcs value) All are maytech popular motors:  1. MTO6355-200-HA 200KV Unsealed Sensored 8mm Shaft 2. MTO6355-170-HA-C 170KV Sealed Sensored 8mm Shaft 3. MTO6365-200-HA 200KV Unsealed Sensored 8mm Shaft 4. MTO6365-170-HA-C 170KV Sealed Sensored 8mm Shaft 5. MTO6365-170-HA-C2 170KV Sealed Sensored 10mm Shaft 6. MTO6374-190-HA 190KV Unsealed Sensored 8mm Shaft 7. MTO6374-170-HA-C 170KV Sealed Sensored 8mm Shaft 8. MTO6374-170-HA-C2 170KV Sealed Sensored 10mm Shaft 9. MTO6396-170-HA-C3 170KV Sealed Sensored 10mm Shaft with Big Ball Bearing 10. MTO6880-190-HA-C3 190KV Sealed Sensored 10mm Shaft with Big Ball      Bearing Where to order? Check Below...

Read more

  1. Maytech New 72V VESC Controller MTSVESC7.5R Round VESC based on VESC6.0 Hardware for Electric Skateboard Longboard Model No. MTSVESC7.5R Cont. Current 50A Burst Current 100A Input Voltage 72V Hardware Based on VESC6.0 Firmware  Updatable  Software VESC_TOOL Compatible FOC  Yes, can work  Size  Round Shape 88mm diameter * 22mm height Compatible Motor Sensored / Sensorless Motor   2. Maytech NEW 10S 42V VESC6.0 based Controller MTSVESC6.0M 30A VESC for Electric Skateboard E-scooter Model No. MTSVESC6.0M Cont. Current 30A Burst Current 50A Input Voltage 42V(10S) Hardware Based on VESC6.0 Firmware  Updatable  Software VESC_TOOL Compatible FOC  Yes, can work  Size  65mm*20mm   Compatible...

Read more

1. If a vehicle does not need mechanical brakes, but must be able to brake, it must use electronic brakes. The principle is that the kinetic energy on the motor and the load can be used as a generator through the DC motor to convert the kinetic energy into electrical energy. Then the electric energy is consumed by heating and charging.   2. The electric energy that is emitted must not only charge the battery, but also release the heat. What is the process? 2.1 At this time, VESC has to make a distribution, which current is used to charge...

Read more