News and Guidence.

How to Connect Encoder to VESCTOOL Compatible Controller witout Remove Pull-up Resistor?

How to Connect Encoder to VESCTOOL Compatible C...

What is encoder?  An encoder is a device that complies and converts a signal or data into a signal from that can be used for communication, transmission and storage.  What...

How to Connect Encoder to VESCTOOL Compatible C...

What is encoder?  An encoder is a device that complies and converts a signal or data into a signal from that can be used for communication, transmission and storage.  What...

How to Update ESC Firmware by STLink ?

How to Update ESC Firmware by STLink ?

ST Link updagrading manual:  Our Standard STLink USB only matches 4 pitch cable, there’s 2 different situation when use the STLink: If ESC connect to power, you can only connect...

How to Update ESC Firmware by STLink ?

ST Link updagrading manual:  Our Standard STLink USB only matches 4 pitch cable, there’s 2 different situation when use the STLink: If ESC connect to power, you can only connect...

Differences of VESC PPM Control Modes !

Differences of VESC PPM Control Modes !

Check what differences for VESC PPM Control Modes and find suitable control mode for your usage:    Off: Nothing, motor if off and not working; Current: With brake and reverse,...

Differences of VESC PPM Control Modes !

Check what differences for VESC PPM Control Modes and find suitable control mode for your usage:    Off: Nothing, motor if off and not working; Current: With brake and reverse,...

See What Upgraded on New 200A VESC-tool compatible controller !

See What Upgraded on New 200A VESC-tool compati...

Maytech Upgraded 200A VESC-tool Compatible MTVESC7.12 Overview:  Electric Motorcycles/scooters, electric offroad skateboards, go-karts, and robots, etc demands ESCs with high current, high voltage and small size, but traditional electric bicycle...

See What Upgraded on New 200A VESC-tool compati...

Maytech Upgraded 200A VESC-tool Compatible MTVESC7.12 Overview:  Electric Motorcycles/scooters, electric offroad skateboards, go-karts, and robots, etc demands ESCs with high current, high voltage and small size, but traditional electric bicycle...

Notice and Tips for Usage of MTSVESC7.5H !

Notice and Tips for Usage of MTSVESC7.5H !

Introduction:  MTSVESC7.5H is based on 75V 300A VESC hardware and firmware construction. It is mainly used for controlling brushless motor on mobile devices with 20S and below Lipo battery(max 85V,...

Notice and Tips for Usage of MTSVESC7.5H !

Introduction:  MTSVESC7.5H is based on 75V 300A VESC hardware and firmware construction. It is mainly used for controlling brushless motor on mobile devices with 20S and below Lipo battery(max 85V,...