emountainboard RSS

When you received the MTSKR1905WF / MTSKR2005WF remote, firstly you need to connect receiver to your VESC / ESC, and pair the remote with receiver.  1. If you use VESC with built-in BEC, then just need to connect the throttle wire on ESC to receiver PWM port, receiver port definition as below, same as both MTSKR2005WF and MTSKR1905WF:      2. If you use OPTO without built-in 5V BEC, then you also need to add a 5V UBEC to power the receiver, wiring diagram as below:        3. After connected correctly, then do pair steps as below:  Firstly,...

Read more

Order random 5 motors from below 10 types motors, can get a free Esk8 remote (US$65.9/pcs value) All are maytech popular motors:  1. MTO6355-200-HA 200KV Unsealed Sensored 8mm Shaft 2. MTO6355-170-HA-C 170KV Sealed Sensored 8mm Shaft 3. MTO6365-200-HA 200KV Unsealed Sensored 8mm Shaft 4. MTO6365-170-HA-C 170KV Sealed Sensored 8mm Shaft 5. MTO6365-170-HA-C2 170KV Sealed Sensored 10mm Shaft 6. MTO6374-190-HA 190KV Unsealed Sensored 8mm Shaft 7. MTO6374-170-HA-C 170KV Sealed Sensored 8mm Shaft 8. MTO6374-170-HA-C2 170KV Sealed Sensored 10mm Shaft 9. MTO6396-170-HA-C3 170KV Sealed Sensored 10mm Shaft with Big Ball Bearing 10. MTO6880-190-HA-C3 190KV Sealed Sensored 10mm Shaft with Big Ball      Bearing Where to order? Check Below...

Read more