hybrid skateboarding RSS

We've got many times about this questions: How can I set the ESC values for my Efoil, today we will talk about this.  1. If you use our 300A ESC to work with our motor, then suggest you use the default values, because our engineer had already adjusted the values to make them work properly before shipment.  Default values is as below:  2. In second situation, if you use our ESC to work with other brands motors, you can use the default value to test at first, if not working, then you can try to adjust the values by progcard...

Read more

  1. Maytech New 72V VESC Controller MTSVESC7.5R Round VESC based on VESC6.0 Hardware for Electric Skateboard Longboard Model No. MTSVESC7.5R Cont. Current 50A Burst Current 100A Input Voltage 72V Hardware Based on VESC6.0 Firmware  Updatable  Software VESC_TOOL Compatible FOC  Yes, can work  Size  Round Shape 88mm diameter * 22mm height Compatible Motor Sensored / Sensorless Motor   2. Maytech NEW 10S 42V VESC6.0 based Controller MTSVESC6.0M 30A VESC for Electric Skateboard E-scooter Model No. MTSVESC6.0M Cont. Current 30A Burst Current 50A Input Voltage 42V(10S) Hardware Based on VESC6.0 Firmware  Updatable  Software VESC_TOOL Compatible FOC  Yes, can work  Size  65mm*20mm   Compatible...

Read more

1. If a vehicle does not need mechanical brakes, but must be able to brake, it must use electronic brakes. The principle is that the kinetic energy on the motor and the load can be used as a generator through the DC motor to convert the kinetic energy into electrical energy. Then the electric energy is consumed by heating and charging.   2. The electric energy that is emitted must not only charge the battery, but also release the heat. What is the process? 2.1 At this time, VESC has to make a distribution, which current is used to charge...

Read more

How to Install Motor on MTSKT310DB Dual Belt-driven Truck? Check below Video: New Gravity Casting Technology: 1. Aluminum liquid flow into truck mould by liquid's weight naturally, this way can delete mould's inside air clearly.2. do heat treatment after demoulding (truck surface is a little rough because of heat treatment). Prouction time is longer than old die casting technology, and the production cost is twice than before.3. Hardness reached out HRB65 around, which can stand over 150kg weight for professional skateboarders.     Compatible Motor: 5055/5065/6355/6365/6374 Motor Mount: 30mm and 44mm hole distance  1. Maytech Brushless Outrunner Sensored Motors 2....

Read more

MTSKR2005WF is designed only for electric skateboard application, please do not use for electric surfboard.  Difference between MTSKR1905WF and MTSKR2005WF, check below chart: Can I use the MTSKR2005WF on electric surfboard? No, MTSKR2005WF only has Esk8 mode, don't have Esurf mode, no cruise control mode; Besides, MTSKR2005WF remote is only IP67 waterproof, enough for electric skateboard usage, but not enough for electric surfboard, MTSKR1905WF inside circuit is not only with glued, but also with nanometer coating double waterproof, and the screen is with 2 layers waterproof screen; At last, the throttle Zero is different, can't compatible with Esurf application. 

Read more