motorboard RSS

When you received the MTSKR1905WF / MTSKR2005WF remote, firstly you need to connect receiver to your VESC / ESC, and pair the remote with receiver.  1. If you use VESC with built-in BEC, then just need to connect the throttle wire on ESC to receiver PWM port, receiver port definition as below, same as both MTSKR2005WF and MTSKR1905WF:      2. If you use OPTO without built-in 5V BEC, then you also need to add a 5V UBEC to power the receiver, wiring diagram as below:        3. After connected correctly, then do pair steps as below:  Firstly,...

Read more

We've got many times about this questions: How can I set the ESC values for my Efoil, today we will talk about this.  1. If you use our 300A ESC to work with our motor, then suggest you use the default values, because our engineer had already adjusted the values to make them work properly before shipment.  Default values is as below:  2. In second situation, if you use our ESC to work with other brands motors, you can use the default value to test at first, if not working, then you can try to adjust the values by progcard...

Read more

  1. Maytech New 72V VESC Controller MTSVESC7.5R Round VESC based on VESC6.0 Hardware for Electric Skateboard Longboard Model No. MTSVESC7.5R Cont. Current 50A Burst Current 100A Input Voltage 72V Hardware Based on VESC6.0 Firmware  Updatable  Software VESC_TOOL Compatible FOC  Yes, can work  Size  Round Shape 88mm diameter * 22mm height Compatible Motor Sensored / Sensorless Motor   2. Maytech NEW 10S 42V VESC6.0 based Controller MTSVESC6.0M 30A VESC for Electric Skateboard E-scooter Model No. MTSVESC6.0M Cont. Current 30A Burst Current 50A Input Voltage 42V(10S) Hardware Based on VESC6.0 Firmware  Updatable  Software VESC_TOOL Compatible FOC  Yes, can work  Size  65mm*20mm   Compatible...

Read more

Maytech 65162 Motor Test Video after 24 hours immerged in Water.  Test temperature, no-load current leakage, waterproof performance.     

Read more

MTSKR2005WF is designed only for electric skateboard application, please do not use for electric surfboard.  Difference between MTSKR1905WF and MTSKR2005WF, check below chart: Can I use the MTSKR2005WF on electric surfboard? No, MTSKR2005WF only has Esk8 mode, don't have Esurf mode, no cruise control mode; Besides, MTSKR2005WF remote is only IP67 waterproof, enough for electric skateboard usage, but not enough for electric surfboard, MTSKR1905WF inside circuit is not only with glued, but also with nanometer coating double waterproof, and the screen is with 2 layers waterproof screen; At last, the throttle Zero is different, can't compatible with Esurf application. 

Read more