In Stock Maytech DIY Foil Boost Kit with 3.5KW 6374 Waterproof Motor + 100A V6 based VESC Controller + MTSKR1905WF Waterproof Remote
In Stock Maytech DIY Foil Boost Kit with 3.5KW 6374 Waterproof Motor + 100A V6 based VESC Controller + MTSKR1905WF Waterproof Remote
Normaler Preis
$314.20 USD
Normaler Preis
Verkaufspreis
$314.20 USD
Stückpreis
/
pro
Application:
DIY foil assist on wing foil, wind surf foil, sup foil board, kite foil, underwater thruster, sup foil assist, paddle assist, wind foil board, sup board, downwind, hull cleaning device, underwater rov, underwater cleaning robot, boat cleaner, quariums or submerged environments, tank cleaning, underwater drone, etc.,
Aiming to convert non-electric foil boards to electric foil easily with reasonable cost.
Click Here: How to Display Volt, Current, RPM with TX and RX?
1. 6374 waterproof motor, In Stock
Model No | MTO6374-150-WPC or MTO6374-150-WPC2 |
KV | 150, can customize, contact agnes@maytech.cn if you want other KV |
Idle Current | 0.8A |
Max Current | 65A |
Rated Current | 60A |
Input Voltage | 3-12S Lipo (12-50V) |
Max Output Watt | 3550W |
Shaft | No output shaft |
Hall Sensor | Without |
Waterproof Rank | IPX8 |
Cable Length |
Ceramic Bearing motor is with 240mm long cables; Stainless stell bearing motor is with 1m long cables. |
Bearing | Ceramic bearing or Stainless stell bearing |
Customize | KV, logo, shaft, mounting hole pattern, color, connector, cable, etc. contact agnes@maytech.cn |
2. MTSPF60100 100A VESC Upgrade Version based on VESC6.0 Hardware with Black oxidized Heat Sink:
Model No. | MTSPF60100 VESC Controller |
Input Voltage | 3-12S Lipo (12.6V-50V) |
Hardware | VESC6.0 |
Firmware | Updatable |
Cont Current | 100A |
Burst Current | 240A |
Software | VESCTOOL Compatible |
Heat Sink | With, attach to mosfet, better heat dissipation |
Waterproof | No, not waterproof, please do good waterproof job if you use it for water sports |
3. MTSKR1905WF IP67 waterproof remote
Model No | MTSKR1905WF |
Waterproof Rank | IP67 double waterproof |
Thr Mode | ESURF (SF) and ESK8 (SK) |
3 Speed Modes | With, adjust throttle % from 20-100% |
Power Modes | 2 levels, Eco (Level 1) < Pro (Level 2) |
Throttle Lock | Yes, 10-30S optional |
Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
Output Signal | Max 3.3V |
Display Parameters |
Current, voltage, temperature only when work with VESC or Maytech MTSF300A-WP32 ESC; |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Safety Button | Support |
Cruise Control | With in Esurf Mode |
Brake | With in Esk8 Mode |
Accessories | Wirelss charging pad / Receiver / USB cable / Wristband / 3pcs Dupond cable |
Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., |
Updated functions:
1. Add 3 speed modes options:
You can adjust max throttle % from 20-100% good for beginners
2. Stronger Signal and optional
Remote and receiver signal strength is enhenced to avoid some signal interference nearby, and with 2 levels signal strength optional in the remote, level 1 weaker signal but save power, level 2 stronger signal more consumption.
3. Better Waterproof Performance:
4. Compatible with Maytech new MTSF300A-WP32 ESC
Could compatible with Maytech new small MTSF300A-WP32 ESC and can display voltage, current, temperature, etc parameters
5. Display Voltage in %
Can display voltage %, so you can know when it's low voltage and charge in time
6. Throttle Lock Function
Add throttle lock function, you can set lock time from 10-30s, safer to use
> Get E-Manual: Remote Manual and Instruction
> Check Video Using Instruction
Click Here: How to Display Volt, Current, RPM with TX and RX?
4. Customer's Feedbacks !
Stock Notice Before Place Order:
1. The motor 150KV is in limited stock, so please confirm your order asap, or please contact us agnes@maytech.cn to check stock first if you need very urgently.KV can be customized, if you want to customize, we can do for you, please contact us for the KV you want.
2. Shipping time is about 24 working hours after your order confirmed for stock item, if not in stock, lead time is about 30-40 days.
3. Motor wire leads out position is specific, if wind one more circle or one less circle, the KV would differ much, hard to make exact KV, so each motor might has ±5%-10% tolerance, this is normal.
Related Products: (Click the following pictures to check more products)
Share
0
Artikel gesamt
$0.00
Produktzwischensumme
Alle 0 Artikel aus deinem Warenkorb entfernen?