Maytech MTSKR1905WF V2 IP67 Waterproof Remote Control 2.4GHz wireless hand remote compatible with VESC for Esk8 Esurf Efoil Hydrofoil RC Boat
Maytech MTSKR1905WF New Waterproof Remote Control compatible with VESC tool for Esk8/Esurf with Display and Wireless Charging Functions with Receiver Electric Foil Hydrofoil Efoil Foilsurf Electric Surfboard Electric Skateboard Mountainboard
Stock Notification:
The remote was just sold out, lead time is about 20-40 days.
If you want to use the remote on Esk8, suggest to use MTSKR2005WF Esk8 Remote.
MTSKR1905WF VS MTSKR1805WF:
| Item | MTSKR1905WF (V2) | MTSKR1805WF (V1) |
| Waterproof | IP67 Waterproof with 2 Layers Nanometers Coating | IP66 Waterproof |
| Mode | Esk8/Esurf | Esk8/Esurf |
| Display Screen |
Remote & Battery Power; Throttle Percentage; Signal Strength; RPM. Current; Temp; Volt; Speed; ; Distance(When work with VESC) |
Remote & Battery Power; Throttle Percentage; Signal Strength |
| Signal | PWM, Stronger, not easy to be interfered | PWM, sometime easy to be interfered |
| Double Source Power Supply | Accept 5V power by ESC built in BEC or extra 5V power | Accept only 5V power by ESC built in BEC |
| Firmware Updatable | Yes | No |
| Control Pump | Yes (Relay Switch) | No |
| Control Light | Yes (Transistor Switch) | No |
| Set Safety Button | Acceptable | No |
| Brake Button | Yes | Yes |
| Cruise Control | Yes | Yes |
| Wireless Charging | Yes | Yes |
| Accessories | Charging Pad; Receiver; 3pcs Dupont Cables | Charging Pad; Receiver |
Specification for V2 MTSKR1905WF:
If your surrounded has strong magnetic interference, the signal might easy get lost, suggest you order the version with 1m or 3m extend antenna.
Tips After Using:
Go to the following Youtube Links to check the remote instruction videos:
1. Motor RPM display by MOTOR WIRE: https://youtu.be/N1IV1dJbil0
2. Motor RPM display by Hall Sensor: https://youtu.be/YBRBzAa-3ww
3. Motor RPM display by VESC: https://youtu.be/qqaZf78ilV4
4. Esk8 mode with speed, current, distance, etc: https://youtu.be/ycFya3Xn7YU
5. Adjust Current mode and Duty cycle mode by remote: https://youtu.be/BPRIhySE7lw
6. Connect to VESC or VESC based Controller: https://youtu.be/sDiAPsg0hWc
7. Remote voltage display for Esk8 and Esurf: https://youtu.be/LZf98XgVwwI
8. Remote can control two switches for Esk8 light and Esurf pump: https://youtu.be/USQHbe3tCOs
9. Receiver wiring with VESC or VESC based controller
(You can select the functions you need and connect them accordingly.)
10. Receiver wiring with Maytech 300A ESC MTSF300A-OPTO
(You can select the functions you need and connect them accordingly.)
11. Maytech MTSF300A-OPTO-WP fully waterproof ESC with built-in UBEC and receiver wiring
12. Maytech MTSF300A-OPTO-WP fully waterproof ESC with Built-in UBEC and External Receiver Diagram
Related Products: Click the pictures to check specs
Esk8 Products: Brushless Motors, VESC, Truck, Wheels, etc.,
