Maytech.cn
In Stock Waterproof 120116 Motor + 300A 75V VESCTOOL Compatible Controller + Waterproof Remote + Anti-spark Switch + Water Pump
In Stock Waterproof 120116 Motor + 300A 75V VESCTOOL Compatible Controller + Waterproof Remote + Anti-spark Switch + Water Pump
Verfügbarkeit für Abholungen konnte nicht geladen werden
300A 75V V75_300 based Watercooled Speed Controller + MTI120116 100KV 200KV Waterproof Inrunner Sensorless Motor + MTSKR1905WF IP67 Waterproof Remote + 300A 85V Anti-spark Switch + Water Pump Set for Efoil, Electric Hydrofoil High Voltage Electric Vehicles, etc.,
Frequently Asked Questions:
- How much voltage can be used for this kit?
- Is water pump necessary?
- The controller is watercooled, not fully waterproof, so if you will use this for water sports like Efoil, surfboard, then please better order together with the water pump for cooling.
- Is anti-spark switch needed?
- What applications can this kit be used to?
- Set in VESCTOOL:
The VESC is open source, these values are just for reference based on our engineer experience for your reference.
Specifications:
-Motor: MTI120116-WP Inrunner Sensorless Watercooled Brushless DC Motor
Model No. | MTI120116-WP | Idle Current | 2.1A/8.4V |
Internal Resistance | 0.0322Ω | Max Current | 300A |
KV | 100KV / 200KV | Shaft | Keyway Shaft |
Input Volt |
6-12S Lipo (25V-50.4V) for 200KV; 8-24S Lipo (33.6V-100V) for 100KV |
Max Output Watt | 10.5KW |
Max Pull | 15.5 N.m | Motor Weight | 2800g |
Motor Size | 85X167.2mm | Shaft | 12mm |
Cable Length | 1m | Plug Size | See Drawing |




-MTSVPF7.5H 300A 75V VESCTOOL Compatible Speed Controller:
The VESC is open source, these values are just for reference based on our engineer experience for your reference.

1.AUX port to supply 12V and 5V to external device;
2.PPM port to connect PPM transceivers;
3.CAN Port for CAN communication with other devices and VESC arrays;
4.Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
5.SWD port to get direct access to the Chipset. Diagnostics, debugging, and real time data;
6.COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
7.USB port for programming.


-Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver
Item | MTSKR1905WF (V2) |
Waterproof Rank | IP67 Waterproof with 2 Layers Nanometers Coating |
Control Mode | Esk8/Esurf |
Signal | PWM (PPM) |
PWM Signal Output Range: | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built in BEC or extra 5V power |
UART | Acceptable |
Display | Remote and battery power, signal strength, throttle and brake percentage, RPM, speed, mileage; Current, voltage, |
Firmware Updatable | Yes |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Set Safety Button | Acceptable |
Brake Button | Yes |
Cruise Control | Yes, in Esurf mode |
Wireless Charging | Yes |
Accessories | Charging Pad; Receiver; 3pcs Dupont Cables |


-MTS2009AS Anti-spark Switch 300A 85V
Model No. |
MTS2009AS |
Max Current |
300A |
Max Voltage |
25V-80V |
Size |
96.5 x 56 x 25 (mm) |
Switch Diameter |
12mm |
Switch Type |
Use NMOS to realize switching on/off Power positive |
Connector | With 4pcs Cold-pressed Terminal Connector |
Function | Protect your controller and power supply system when brake or startup |
Features |
First Switch that can cut off positive pole power in the market; Switch comes with LED light indicator; |
Application | Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, etc., |

-Water Pump + DC-DC Power Supply System

Share



















0
Artikel gesamt
$0.00
Produktzwischensumme
Frequently Bought Together
- In Stock Waterproof 120116 Motor + 300A 75V VESCTOOL Compatible Controller + Waterproof Remote + Anti-spark Switch + Water Pump
$1,675.50$1,507.95 - +