300A-400A 85V VESC 75_300 based Watercooled Speed Controller + MTI120116 100KV Waterproof Inrunner Sensorless Motor with 7.5*7 inch Propeller+ MTSKR1905WF IP67 Waterproof Remote + 300A 85V VESC Anti-spark Switch + Water Pump Set for Efoil, Electric Hydrofoil High Voltage Electric Vehicles, etc.,
Frequently Asked Questions:
- How much voltage can be used for this kit?
- Is water pump necessary?
- The VESC is watercooled, not fully waterproof, so if you will use this for water sports like Efoil, surfboard, then please better order together with the water pump for cooling.
- Is anti-spark switch needed?
- What applications can this kit be used to?
-Motor: MTI120116-WP Inrunner Sensorless Watercooled Brushless DC Motor
|Model No.||MTI120116-WP||Idle Current||2.1A/8.4V|
|Internal Resistance||0.0322Ω||Max Current||300A|
|KV||100KV Splined shaft with 7.5*7 propeller||Shaft||Splined Shaft|
8-24S Lipo (33.6V-100V) for 100KV
|Max Output Watt||10.5KW|
|Max Pull||15.5 N.m||Motor Weight||2800g|
|Cable Length||1m||Plug Size||See Drawing|
-MTSVESC7.5H 300A-400A 85V VESC
1.AUX port to supply 12V and 5V to external device;
2.PPM port to connect PPM transceivers;
3.CAN Port for CAN communication with other devices and VESC arrays;
4.Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
5.SWD port to get direct access to the Chipset. Diagnostics, debugging, and real time data;
6.COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
7.USB port for programming.
-Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver
|Waterproof Rank||IP67 Waterproof with 2 Layers Nanometers Coating|
|PWM Signal Output Range:||1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode.|
|Double Source Power Supply||Accept 5V power by ESC built in BEC or extra 5V power|
|Display||Remote and battery power, signal strength, throttle and brake percentage, RPM, speed, mileage; Current, voltage,|
|Control Pump||Yes (Relay Switch)|
|Control Light||Yes (Transistor Switch)|
|Set Safety Button||Acceptable|
|Cruise Control||Yes, in Esurf mode|
|Accessories||Charging Pad; Receiver; 3pcs Dupont Cables|
-MTS2009AS Anti-spark Switch 300A 85V
|96.5 x 56 x 25 (mm)|
Use NMOS to realize switching on/off Power positive
|Connector||With 4pcs Cold-pressed Terminal Connector|
|Function||Protect your controller and power supply system when brake or startup|
First Switch that can cut off positive pole power in the market;
Switch comes with LED light indicator;
|Application||Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, etc.,|
-Water Pump + DC-DC Power Supply System