Direkt zum Inhalt
Maytech.cn--Maytech official website Maytech.cn--Maytech official website
Account
Suchen
Wird geladen...
Einkaufswagen
  • All Brushless Motors
    • Brushless Outrunner Sensored Motor
    • Brushless Outrunner Sensorless Motor
    • Brushless Inrunner Sensored & Sensorless Motor
    • Brushless Hub Motor
  • All Speed Controller
    • VESC Controller for Esk8/Robot/E-bike
    • BLheli Firmware 32bit ESC for Drone
    • Falcon-Pro 32bit Firmware & Harrier-Eco ESC for Airplane/Helicopter
  • Esk8/Esurf/Robotics, etc.,
    • Remote Controllers
    • Speed controllers for Esk8,Mountainboard, robots
    • Motors for Esk8,Mountainboard, robots
    • Kits for Esk8/mountainboard/Robot
    • Truck, Belt, Pulley, wheel, etc., for Esk8, Mountainboard, Robots
    • Speed Controllers for Esurf/Efoil/Boat
    • Motors & Props for Esurf/Efoil/Boat
    • Kits for Esurf/Efoil/Boat parts
  • Airplane/Drone Parts
    • All Airplane/Helicopter Motors
    • All Airplane/Helicopter ESCs
    • All Airplane/Helicopter Propellers
    • All Drone/Multicopter Motors
    • All Drone/Multi-copter ESCs
    • All Drone/Multi-copter Propellers
  • About Us
  • OEM Project
  • Account
  • Home
  • / News and Guidence.
  • / Can I use Switching Power Supply on VESC?

Can I use Switching Power Supply on VESC?

Can I use Switching Power Supply on VESC?

Geposted von maytech@maytech.cn maytech@maytech.cn am Juni 12, 2020

The answer is no, here's 2 reasons:

1. Because switching power supply voltage can reach to 300V at the moment of power connected, then switching power need to adjust voltage to specific voltage (such as 20V, 35V), most switching power has slow response, the 300V voltage will directly burn controller driver chip and MCU, also may cause capacitor swell.

 

2. Connect power first (for example 35V), connect load, when load weight is too high, voltage will decrease (almost 30V),at this time switching power supply need to increase voltage to specific value (35V), but load weight is constantly changing, if load weight change to smaller at this moment, instant voltage will be higher, which will burn controller.

For example, at the moment of power connected, capacitor will be charged quickly, voltage will be decreased, if switching power need to maintain setup value then it must increase voltage, but capacitor stop charging when full charged, at this momment switching power actual voltage will be higher than setup voltage, there’s time difference when it knows the problem and then decrease voltage to setup value, controller already burned.

 

Maytech MTVESC50A Electric Speed Controller based on V4.12 for Electric Skateboard/Fighting RobotsMaytech SUPERFOC6.8 50A VESC6-based speed controller compatible to VESCtool Programmable for Esk8/EbikeMTVESC100A VESC4-based Speed Controller with Aluminum Case for Esk8/Robotics

Maytech MTSVESC6.0 based 200A VESC Speed Controller for Esk8/Mountainboard/RoboticsMaytech MTVESC6.12 Upgraded 200A VESC based on VESC6.0 Controller with Anti-spark Circuit Electric Speed Controller for Esk8/Fighting Robots/Esurf

 

Teile das: Auf Facebook teilen Auf Twitter twittern Auf Pinterest pinnen

Vorausgehend

What makes VESC DRV Burned?
Juni 05, 2020

What makes VESC DRV Burned?

Neben

VESC Driver 1: How to Install VESC Driver by inf. File Folder?
Juni 19, 2020

VESC Driver 1: How to Install VESC Driver by inf. File Folder?

Collections

Remote Controller

Kits and parts for Efoil/Esurf/RC Boat

VESC_TOOL Compatible Controllers

Brushless Outrunner Sensored Motor

Maytech MTSKR1905WF V2 IP67 Waterproof Remote Control 2.4GHz wireless hand remote compatible with VESC for Esk8 Esurf Efoil Hydrofoil RC Boat

Maytech MTSKR1905WF V2 IP67 Waterproof Remote Control 2.4GHz wireless hand remote compatible with VESC for Esk8 Esurf Efoil Hydrofoil RC Boat

$6.00 Normaler Preis $7.50

This is the perfect product!

We couldn't have asked for a better service!

Location

About Maytech

We are company integrated with design, development,

manufacture and sale for over 13 years, we do brushless motor, controller, remote , etc electronics for electric skateboard, electric surfboard, flight model products. 

Featured articles

Maytech MTSKR2005WF New Remote Instruction
August 07, 2020

Maytech MTSKR2005WF New Rem...

1. Remote Apperance: 2. Receiver wiring instruction with VESC or VESC based Controllers:  There's 2 ways to connect receiver and VESC:...

Weiterlesen
  • All Brushless Motors
    • Outrunner Sensored Motor
    • Outrunner Sensorless Motor
    • Inrunner Sensored & Sensorless Motor
    • Hub Motor
  • All Speed Controller
    • VESC Controller for Esk8/Robot/E-bike
    • Waterproof & Watercooled ESC for Esurf
    • BLheli Firmware 32bit ESC for Drone
    • Falcon-Pro 32bit Firmware & Harrier-Eco ESC for Airplane/Helicopter
  • Esk8/Mountainboard/Robotic Parts
    • Remote Controllers
    • Electric Skateboard Parts
    • Esurf/Efoil/Boat Parts
    • Esk8/Robots Comb
  • Efoil/Esurf/Hydrofoil Parts
    • Waterproof & Watercooled Inrunner Motor
    • Waterproof Remote
    • Esurf ESC Powerful
  • About Us
  • OEM Project
  • Shipping & Warranty
Urheberrecht © 2021 Maytech.cn--Maytech official website. Thema von Clean Canvas. Powered by Shopify
  • All Brushless Motors
  • All Speed Controller
  • Esk8/Mountainboard/Robotic Parts
  • Efoil/Esurf/Hydrofoil Parts
  • About Us
  • OEM Project
  • Shipping & Warranty
PayPal