boat kit RSS

Our 300A ESCs default firmware is without throttle calibration, which is compatible with Maytech remote (1-2ms throttle signal range) We also have another firmware version that with throttle calibration, can rotate motor in single direction, or forward and reverse directions for electric surfboard, efoil, rc boat, rescue boat, kayak, etc., water sports.  1. How to update different firmware for Maytech MTSF300A-OPTO and MTSF300A-WP? If you need to update the firmware, you can contact us for the firmware and we will send to you, or when you place order, you can send email to agnes@maytech.cn we will send you the firmware. ...

Read more

Order random 5 motors from below 10 types motors, can get a free Esk8 remote (US$65.9/pcs value) All are maytech popular motors:  1. MTO6355-200-HA 200KV Unsealed Sensored 8mm Shaft 2. MTO6355-170-HA-C 170KV Sealed Sensored 8mm Shaft 3. MTO6365-200-HA 200KV Unsealed Sensored 8mm Shaft 4. MTO6365-170-HA-C 170KV Sealed Sensored 8mm Shaft 5. MTO6365-170-HA-C2 170KV Sealed Sensored 10mm Shaft 6. MTO6374-190-HA 190KV Unsealed Sensored 8mm Shaft 7. MTO6374-170-HA-C 170KV Sealed Sensored 8mm Shaft 8. MTO6374-170-HA-C2 170KV Sealed Sensored 10mm Shaft 9. MTO6396-170-HA-C3 170KV Sealed Sensored 10mm Shaft with Big Ball Bearing 10. MTO6880-190-HA-C3 190KV Sealed Sensored 10mm Shaft with Big Ball      Bearing Where to order? Check Below...

Read more

Last 10 days Promotion, Best Price Ever ! All products in stock now, but quantity is limited.  Order first Get first !

Read more

What is brushless motor? A brushless DC electric motor (BLDC motor or BL motor), also known as electronically commutated motor (ECM or EC motor) and synchronous DC motors, are synchronous motors powered by direct current (DC) electricity via an inverter or switching power supply which produces electricity in the form of alternating current (AC) to drive each phase of the motor via a closed loop controller. The controller provides pulses of current to the motor windings that control the speed and torque of the motor. The construction of a brushless motor system is typically similar to a permanent magnet synchronous...

Read more

For motor run correctly, it is very important to set correct parameters in VESC_TOOL, follow below steps. Preparations before detection: Please detect motor without any load. Make sure that no other input such as PPM is used. If it is, it will stop the motor immediately when the detection tries to start it and the detection will fail. Make sure you have proper VESC_TOOL software is download in your computer. Connect your VESC to your computer.   Detection: BLDC Mode: suggest to detect in BLDC mode first. Step1: Choose BLDC mode in VESC_TOOL.           Suggest to...

Read more