Model No
|
MTO7052HBM |
KV
|
60 |
Idle Current
|
0.5A
|
Max Current
|
22A
|
Inpur Voltage
|
24-42V | Internal Resistance |
0.557-0.577
|
Max Pull
|
6700g
|
Hole Size
|
M8
|

Model No
|
MTSUPERFOC6.8 | Cont Current | 50A |
Lipo Voltage | 3-12S (12.6V-50V) |
Burst Current
|
240A
|
BEC | 5V | PCB Size | 40mm*60mm |
Capatitor | 3pcs 680uf63V | MOS | IRF7530 |
Hardware | Based on V6.0 | Firmware | Updatable |
Only connect CAN L and CAN H ! GND pins and 5V should never be connected in a V6/V75 based SUPERFOC ESCs VESC array.




256kB flash&16kB RAM

1. The bluetooth is developed for communication between controller and VESCTOOL via BLE, to display parameters on mobile phone, so you can monitor real time parameters on app easily.
2. Motor current, duty cycle, ERPM, motor power, motor temperature, battery voltage, battery current, MOS temperature, charging current, charging power, etc., are able to display through the bluetooth module.
3. You can adjust parameters for motor settings, Including General, BLDC, FOC, PID controllers, etc informations.
4. It supports VESCTOOL Compatible controller based on V4, V6.0, V75_300 hardware, please choose the correct hardware version of your controller, we will match compatible cable for you.
5. Firmware is updatable.
Related Products: (Click the following pictures to check more products)
Maytech MTSKR2005WF New Waterproof Remote for Esk8 Only with 3 Speed Modes

Maytech Brushless Outrunner Sensored Motors
Maytech VESCTOOL Compitable Controller: