Maytech.cn
In Stock Esurf Kit Watercooled 85165 Motor + 300A 75V MTSPF7.5H + Waterproof Remote + Anti-spark Switch + Water Pump
In Stock Esurf Kit Watercooled 85165 Motor + 300A 75V MTSPF7.5H + Waterproof Remote + Anti-spark Switch + Water Pump
Normaler Preis
$1,063.52 USD
Normaler Preis
$1,156.00 USD
Verkaufspreis
$1,063.52 USD
Stückpreis
pro
Versand wird beim Checkout berechnet
Verfügbarkeit für Abholungen konnte nicht geladen werden
300A 75V V75_300 based Watercooled Speed Controller + MTI85165 Watercooled Inrunner Sensorless Motor + MTSKR1905WF IP67 Waterproof Remote + 300A 85V Anti-spark Switch + Water Pump Set for Efoil, Electric Hydrofoil High Voltage Electric Vehicles, etc.,
Frequently Asked Questions:
How much voltage can be used for this kit?
- If you use 200KV mtotor, max voltage can use is 50V, if you use 100KV, max voltage can use is 75V.
Is water pump necessary?
- The controller is watercooled, not fully waterproof, so if you will use this for water sports like Efoil, surfboard, then please better order together with the water pump for cooling.
Is anti-spark switch needed?
- Anti-spark switch function is to protect your battery and VESC systems from damaged by power surges when startup and power up, especially when use high voltage, so anti-spark switch is recommended. Our MTS2009AS anti-spark switch can also cut off positive pole power, save your battery power and more convenient to use.
What applications can this kit be used to?
- Efoil, electric hydrofoil, electric boat, electric kayak, electric motorcycle, ev car, agv car, heavy duty cargo robots, electric water sports, counter current swimming machine, etc.,
Set in VESCTOOL:
Motor Current Max: ≤300A (According to your motor current)
Absolute Maximum Current: 350A (According to your motor current)
Battery Current Max: ≤150A (According to your battery discharge current)
You can also use default values after "Setup Motors FOC" detection.
The VESC is open source, these values are just for reference based on our engineer experience for your reference.
The VESC is open source, these values are just for reference based on our engineer experience for your reference.
-Motor: MTI85165-SF Inrunner Sensorless Watercooled Brushless DC Motor
| Model No. | MTI85165-200-SF | Idle Current | 2.1A/8.4V |
| KV | 200 | Max Current | 300A |
| Input Volt | 6-12S Lipo (25-50V) | Max Output Watt | 10.5KW |
| Max Pull | 15.5 N.m | Max RPM | 10000 |
| Motor Size | 85X167.2mm | Shaft | Screw / Keyway Shaft |
| Cable Length | 1m | Plug Size | See Drawing |
-MTSPF7.5H 300A 75V VESCTOOL Compatible Speed Controller SUPER FOC ESC
Model No.: MTSPF7.5H
Current: 300A
Waterproof Rank: Non waterproof
Watercooling: Yes, with
Input Volt: 6-18S Lipo (25V-75V)
Based hardware: V75_300
VESC_TOOL Compatible: Yes
Signal Format: PWM (PPM), UART
Case Material: Alloy aluminum case
Connector: Cold-pressed Terminal Connector
Set in VESCTOOL:
Motor Current Max: ≤300A (According to your motor current)
Absolute Maximum Current: 350A (According to your motor current)
Battery Current Max: ≤150A (According to your battery discharge current)
You can also use default values after "Setup Motors FOC" detection.
The VESC is open source, these values are just for reference based on our engineer experience for your reference.
The VESC is open source, these values are just for reference based on our engineer experience for your reference.
Ports definitions:
1.AUX port to supply 12V and 5V to external device;
2.PPM port to connect PPM transceivers;
3.CAN Port for CAN communication with other devices and VESC arrays;
4.Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
5.SWD port to get direct access to the Chipset. Diagnostics, debugging, and real time data;
6.COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
7.USB port for programming.
1.AUX port to supply 12V and 5V to external device;
2.PPM port to connect PPM transceivers;
3.CAN Port for CAN communication with other devices and VESC arrays;
4.Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
5.SWD port to get direct access to the Chipset. Diagnostics, debugging, and real time data;
6.COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
7.USB port for programming.
3. MTSKR1905WF IP67 waterproof remote
| Model No | MTSKR1905WF |
| Waterproof Rank | IP67 double waterproof |
| Thr Mode | ESURF (SF) and ESK8 (SK) |
| 3 Speed Modes | With, adjust throttle % from 20-100% |
| Power Modes | 2 levels, Eco (Level 1) < Pro (Level 2) |
| Throttle Lock | Yes, 10-30S optional |
| Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
| PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
| Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
| Output Signal | Max 3.3V |
| Display Parameters |
Current, voltage, temperature only when work with VESC or Maytech MTSF300A-WP32 ESC; |
| Control Pump | Yes (Relay Switch) |
| Control Light | Yes (Transistor Switch) |
| Safety Button | Support |
| Cruise Control | With in Esurf Mode |
| Brake | With in Esk8 Mode |
| Accessories | Wirelss charging pad / Receiver / USB cable / Wristband / 3pcs Dupond cable |
| Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
| Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., |
> Get E-Manual: Remote Manual and Instruction
> Check Video Using Instruction
Click Here: How to Display Volt, Current, RPM with TX and RX?
-MTS2009AS Anti-spark Switch 300A 85V
|
Model No. |
MTS2009AS |
|
Max Current |
300A |
|
Max Voltage |
25V-80V |
|
Size |
96.5 x 56 x 25 (mm) |
|
Switch Diameter |
12mm |
|
Switch Type |
Use NMOS to realize switching on/off Power positive |
| Connector | With 4pcs Cold-pressed Terminal Connector |
| Function | Protect your controller and power supply system when brake or startup |
| Features |
First Switch that can cut off positive pole power in the market; Switch comes with LED light indicator; |
| Application | Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, etc., |
-Water Pump + DC-DC Power Supply System
Feedback Videos on Efoil:
Advice after usage:
1. To expand the products life, please better wipe off the waters on the products and keep them for all dry after everytime use.
2. For this kit of the ESC, because the motor is sensorless, suggest to use the default value in the ESC, we have tested the kit before shipment with the default value, do not suggest to modify the values.
If you have other requirement on motor KV, ESC or other questions, please contact us agnes@maytech.cn
0
Artikel gesamt
$0.00
Produktzwischensumme