Maytech MTSP7507 7.5x7 inch Propeller for Electric Surfboard RC Boat

Maytech Waterproof 18KW Brushless DC Motor 120116 100KV Splined Shaft for Electric Surfboard Boat Jetboard

Maytech Waterproof 18KW Brushless DC Motor 120116 100KV Splined Shaft for Electric Surfboard Boat Jetboards 

Specification:

Different application for Sensored and Sensorless Version:

To meet different customers requirements, we designed one version with hall sensor, one version without hall sensor. 

Sensored version can not only be used underwater but also can be used on electric skateboard, fighting robots, electric cars, etc.,

Sensorless version usually use for underwater electric vehicles, electric surfboard, Efoil, hydrofoil, rc boat, water jet propulsion, etc.,

Application:

Electric surfboard/Hydrofoil/jetski/jetboard/waterboard/water jet propulsion/surffoil/foilsurf/foilboards/rc boat, foil boat, foiling boat, hydrofoil boat, catamaran, budsboat, pontoon, hydrofoiling boat, rescue boat, etc.,

Warning:

Flier ESCs are not compatible to all Maytech motors, recommend to use our 300A ESC as following recommend products. 

Esurf Kit Test: MTI120116-200-WP+MTSF300A-OPTO-WP+MTSKR1905WF

Maytech Waterproof 300A 14S 60V Watercooled ESC for Efoil Electric Surfboard Jetsurf

Maytech MTSF300A-WP IP68 Waterproof 300A ESC 300A 85V Anti-spark Switch Water Pump Esurf Kit Speed Controller for Efoil/RC Boat

Upgraded Notice Since July 29, 2022. 

Upgrade with waterproof junction box for wiring as below picture: 

Receiver can be put in the junction box to be waterproof, too: 

Pre-order Maytech New Marine 32Bit 300A 60V ESC IP68 Waterproof Smaller Size for Efoil Underwater Thruster Electric Surfboard

Pre-order Maytech New 300A 60V Waterproof ESC Smaller Size for Efoil Underwater Thruster Electric Surfbord

Specification: 

Strengths:

Related Products: 

In Stock Maytech IP67 Waterproof Remote MTSKR1905WF Controller for Esk8/ Esurf/ Efoil

Specification: 

Features: 

> Get Manual: Remote Manual and Instruction

Click Here: How to Display Volt, Current, RPM with TX and RX? 

The remote has 2 Modes, signal output pulse width is different in 2 modes:

• Esurf Mode is 1ms-2ms, no stop no brake, if you use Esurf mode to work with VESCTOOL compatible controller, please use below settings in VESCTOOL and to match with the remote:

PPM Control Type: Current no reverse
PPM Mapping: Pulselength Start: 1.1ms; Pulselength End: 1.9ms; Pulselength Center: 1.5ms

Or you can use wizard mode to detect compatible value. 

• Esk8 Mode is 1.5ms-1ms (Brake), 1.5ms-2ms (Speed up), 1.5ms is stop position.

Please noted to match compatible parameters for different modes in VESC_TOOL. 

Tips After Using:

In order to avoid being corroded by sea water and to extend the remote life, please wash the remote in fresh water after using; Also please charge when the remote all dry. 

Go to the following Youtube Links to check the remote instruction videos:

1. Motor RPM display by MOTOR WIRE: https://youtu.be/N1IV1dJbil0

2. Motor RPM display by Hall Sensor: https://youtu.be/YBRBzAa-3ww

3. Motor RPM display by VESCTOOL compatible controller: https://youtu.be/qqaZf78ilV4

4. Esk8 mode with speed, current, distance, etc: https://youtu.be/ycFya3Xn7YU

5. Adjust Current mode and Duty cycle mode by remote: https://youtu.be/BPRIhySE7lw

6. Connect to controller or VESCTOOL Compatible Controller: https://youtu.be/sDiAPsg0hWc

7. Remote voltage display for Esk8 and Esurf: https://youtu.be/LZf98XgVwwI

8. Remote can control two switches for Esk8 light and Esurf pump: https://youtu.be/USQHbe3tCOs

9. Receiver wiring with VESCTOOL compatible speed controller

(You can select the functions you need and connect them accordingly.)

10. Receiver wiring with Maytech MTSF300A-OPTO ESC or other OPTO ESC, (You can select the functions you need and connect them accordingly.)

11. Maytech MTSF300A-WP and MTSF500A-WP fully waterproof ESC:

In Stock 2pcs / 5pcs MTS2009AS Max 300A 85V Anti-spark Switch with Short Cirsuit Protection

Maytech MTS2009AS Max 300A 85V Electronic Anti-spark Switch Battery Cutoff Switch with Short Circuit Protection for Electric Hydrofoil Efoil Surfboard

Specification: 

In Stock Maytech MTI120116 18.8KW Watercooled BLDC Motor Inrunner Sensorless Engine for Esurf/ RC Boat

Maytech Fully Waterproof MTI120116 18.8KW Powerful Brushless Inrunner Motor for Electric Surfboard/RC Boat/Jetski Multiple Versions 

Specification:

Options: Please choose the suitable variation you need according to the following table

Different application for Sensored and Sensorless Version:

Application:

Warning:

Flier ESCs are not compatible to all Maytech motors, recommend to use our 300A ESC as following recommend products. 

Esurf Kit Test: MTI120116-200-WP+MTSF300A-OPTO-WP+MTSKR1905WF