MTS1810AS Anti-spark Switch with On and Off for Electric Skateboard/Mountainboard/Ebike/E-scooter/Fighting Robots/Lawnmower Robots
Maytech Anti-spark on-off power switch board MTS1810AS for VESCTOOL Compatible controller
Function: To protect your controller and battery, eliminate surge current when startup and speed up, because when startup and speed up surge current would be bery high, the antispark switch is protection function.
Anti spark on-off switch for electric skateboard, longboard, bike, scooter e.t.c. Same function as Vedder Anti-Spark.
This switch is a small, efficient, safe and reliable way to power on/off your DIY Electric Skateboard. When doing this, it also protects delicate components (such as the VESC or other ESC's) from unwanted power surges. This anti Spark Switch is recommended to anyone looking to build the ultimate DIY Electric Longboard.
Electric Skateboard Power Switch ON OFF DIY Switch Anti-Spark High Voltage High Amp 100A 6v-50v Electric Longboard.
Model No.
MTS1810AS
Dimension
48mm(L)*22.5mm(W) *5.0(H)
Current
180A
Voltage
50V
Power side Cable
10# 160mm Red and black
Switch Cable
30tin 160mmwith 4pin JR male plug
Related Products: (Click the following pictures to check more products)
Maytech MTSKR2005WF New Waterproof Remote for Esk8 Only with 3 Speed Modes
Aiming to convert non-electric foil boards to electric foil easily with reasonable cost.
V5 Bluetooth Module:
Model No.
MTBLEV5 V5 Upgraded version
Features
With optocoupler isolation, industrial grade anti-interference, and wired long distance communication
Upgrade Function
It supports connection together with receiver TXD and RXD to VESC, so it can automatically switch VESC communication with receiver or bluetooth and you don't need to unplug connections. When bluetooth module connect to VESCTOOL App, it will automatically disconnect receiver TXD and TXD, really convenient.
With 6 LED Lights status
power, communication, data tranmission
Compatible Controller Hardware
V4 / V6 / V75 based SuperESC
Compatible Software
VESCTOOL App
Frequency
2.4Ghz
Distance
15m
Input Voltage
3.3-24V
PCB Size
46mm x 32mm
V2 Bluetooth Module:
Model No.
MTBLEV2 V2 Version
With 3 LED Lights status
power, communication, database
Compatible Controller Hardware
V4 / V6 / V75 based SuperESC
Compatible Software
VESCTOOL App
Frequency
2.4Ghz
ARM Processor
ARM Cortex-M0 32 bit processor 256kB flash&16kB RAM
PCB Size
41mm x 21mm
Net Weight
5g
Antenna Length
90mm
Recommend Products: Click below pictures to check more information
Brushless Outrunner Motors:
$141.70$23.22
×
In Stock SUPERFOC6.8 50V V6.0 based Speed Controller Great FOC Function
Specification:
Model No.
MTSPF6.8
Input Voltage
3-12S Lipo (12.6V-50V)
Hardware
VESC6.0
Firmware
Updatable
Cont Current
50A
Burst Current
240A
Software
VESCTOOL Compatible
Heat Sink
Without
Application
Electric skateboard, elongboard, fighting robots, ebike, escooter, electric vehicles, friction drive ebike, etc.,
Notice:
Never connect one reclever to two or more V6/V75 based SUPERFOC ESCs or VESCs in an array! Permanent damage may result from Y-PPM wiring.
Only connect CAN L and CAN H ! GND pins and 5V should never be connected in a V6/V75 based SUPERFOC ESCs or VESC array.
Attention Points when you receive the Controller Please:
All products had been double checked and tested one by one before shipment, only if the products are working normally would be shipped out.
When you receive the controller, please test without load and do not connect motor, first check if the controller can successfully connect to your computer, if ok, then connect to motor and you can start to adjust parameters.
Do not use switching power supply, the instant voltage when switching power supply connect to controller is very high, which would easy damage the controller.
Do not push the throttle too hard when test without load, gently and slowly speed up.
Be cautious when adjust parameters, if parameters set mistake, would also easy damage the controller.
Please must remember to change to corresponding modes when you adjust parameters, for example, the controller default mode is BLDC mode, but if you want to detect FOC mode and adjusted FOC parameters, at this time if mode in VESCTOOL didn't change to FOC mode, then when you push throttle, would easy burn the VESC, same as FOC mode.
In FOC mode, ERPM suggest to control in 30000-40000; In BLDC moed, ERPM suggest to control in 50000-60000, otherwise driver IC would easy to be damaged. ERPM= motor pole pairs number * KV * Voltage ERPM= motor pole pairs number * KV * Voltage
If you use UART port, the wire better do not over 0.5m or even shorter, and better use Stranded wire.
For V4 based controller:
Do not suggest to use FOC mode, suggest to use BLDC mode. If need to use FOC mode, then must use voltage under 20V.
The above are only suggestions based on the experience of our engineers. how to actually operate is up to you. Parameters for different setup is also different, please noted
V5 Bluetooth Module:
Model No.
MTBLEV5 V5 Upgraded version
Features
With optocoupler isolation, industrial grade anti-interference, and wired long distance communication
Upgrade Function
It supports connection together with receiver TXD and RXD to VESC, so it can automatically switch VESC communication with receiver or bluetooth and you don't need to unplug connections. When bluetooth module connect to VESCTOOL App, it will automatically disconnect receiver TXD and TXD, really convenient.
With 6 LED Lights status
power, communication, data tranmission
Compatible Controller Hardware
V4 / V6 / V75 based SuperESC
Compatible Software
VESCTOOL App
Frequency
2.4Ghz
Distance
15m
Input Voltage
3.3-24V
PCB Size
46mm x 32mm
V2 Bluetooth Module:
Model No.
MTBLEV2 V2 Version
With 3 LED Lights status
power, communication, database
Compatible Controller Hardware
V4 / V6 / V75 based SuperESC
Compatible Software
VESCTOOL App
Frequency
2.4Ghz
ARM Processor
ARM Cortex-M0 32 bit processor 256kB flash&16kB RAM
PCB Size
41mm x 21mm
Net Weight
5g
Antenna Length
90mm
Recommend Products: Click below pictures to check more information
Brushless Outrunner Motors:
$159.00$3.51
×
In Stock Maytech DIY Foil Boost Kit with 3.5KW 6374 Waterproof Motor + 100A V6 based VESC Controller + MTSKR1905WF Waterproof Remote
2. MTSPF60100 100A VESC Upgrade Version based on VESC6.0 Hardware with Black oxidized Heat Sink:
Model No.
MTSPF60100 VESC Controller
Input Voltage
3-12S Lipo (12.6V-50V)
Hardware
VESC6.0
Firmware
Updatable
Cont Current
100A
Burst Current
240A
Software
VESCTOOL Compatible
Heat Sink
With, attach to mosfet, better heat dissipation
Waterproof
No, not waterproof, please do good waterproof job if you use it for water sports
3. MTSKR1905WF IP67 waterproof remote
Model No
MTSKR1905WF (V2), upgraded waterproof and signal strength
Waterproof Rank
IP67 with 2 layers nanometers coating
Control Mode
Esk8/ Esurf
Signal Format
Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%.
PWM Signal Output Range
1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode.
Double Source Power Supply
Accept 5V power by ESC built-in BEC or extra 5V power
Output Signal
Max 3.3V
Display
Remote and battery power, signal strength, throttle and brake percentage, RPM; speed, mileage; Current, voltage, temp when work with VESC
VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote.
Application
foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc.,
4. Customer's Feedbacks ！
Stock Notice Before Place Order:
1. The motor 150KV is in limited stock, so please confirm your order asap, or please contact usagnes@maytech.cnto check stock first if you need very urgently.
KV can be customized, if you want to customize, we can do for you, please contact us for the KV you want.
2. Shipping time is about 24 working hours after your order confirmed for stock item, if not in stock, lead time is about 30-40 days.
3. Motor wire leads out position is specific, if wind one more circle or one less circle, the KV would differ much, hard to make exact KV, so each motor might has ±5%-10% tolerance, this is normal.
Related Products:(Click the following pictures to check more products)
$361.00$98.80
×
In Stock Maytech Electric Skateboard Splashproof Remote Control MTSKR2005WF IP66 2.4GHZ
Maytech MTSKR2005WF IP66 Splashproof Esk8 Remote Electric Skateboard Elongboard Hand Remote with 3 Speed Modes
Notice:
This remote is splashproof, can only use for electric skateboard, mountainboard, elongboard, please do not use for any water sports, otherwise all consequences are at your own risk.
If you want to use for water sports, then please order our MTSKR1905WF IP67 waterproof remote Here>
Specifications:
Model No.
MTSKR2005WF (MTSKR20WFV2)
Waterproof Rank
IP66 splashproof
Speed Display
Yes
Throttle and brake Display
±100%
Speed Mode
3 speed modes, each mode can adjust speed from 1%-100% throttle
Charger
QC 2.0 wireless
Display Screen
OLED yellow & blue screen
Throttle and Brake Signal Output Range
1.5ms-2ms for throttle;
1.5ms-1ms for brake
Voltage Display
Remote & main battery voltage level (lithium iron; lithium ion battery optional)
Telemeter Data by Receiver
Motor RPM; main battery voltage
Telemeter Data by VESC
ESC voltage/ current/ temp; Motor temp/ RPM
Triggers
2x high senstive triggers
Wireless Frequency
2.4GHz wireless with 40 channels
VESC Control Mode
Duty Cycle/ Current Mode
Travel Mileage
Yes
Receiver Built-in Switch for Esk8 Light / Esurf Water Pump
VESCTOOL/ Focbox/ Other PWM ESCs that has same signal output range with the remote
Application
Only for Electric skateboard, elongboard, mountainboard
Features:
1. Display speed (km/h or mph) in Esk8 mode (for electric skateboard) 2. Display voltage in V, current, temperature when work with VESC based controller
3. Display RPM (by 3 ways, hall sensor, VESC, motor wire)
If your surrounded has strong magnetic interference, the signal might easy get lost, suggest you order the version with 1m or 3m Extend Antenna Here >
Tips for Usage:
1. This remote only has Esk8 mode, and it's just normal waterproof, can only work for electric skateboard, please do not use for Esurf. 2. The receiver is not waterproof, please keep the receiver away from water, otherwise the receiver would easy to have short circuit problem. 3. Please attention when weld wire on the receiver or when using, each 2 pins do not touch each other, otherwise would easy to burn the receiver.
Go to the following Youtube Links to check the remote instruction videos:
2. BAT(Receiver) - Positive Pole (Main Battery): Display main battery bar;
3. Receiver TX & RX cross connect with VESC RX & TX: UART, can display speed and distance, also voltage, current, temperature values
4. Relay Switch: To control Pump
5. Transistor Switch: To control light
6. Any of the three hall wires to Hall port: Display speed and distance
7. Any of the three motor wires to MOT port: Display speed and distance.
Above shows 3 ways to display speed and distance, you can choose one way for connection if you need this function.
Above functions also need to combine with your settings in remote, just check manual and instruction.
Recommended and Related Products:
$22.00
×
In Stock V5 Bluetooth Module Can Automatically Switch VESC Communication with Receiver or Bluetooth Module
In Stock V5 Bluetooth Module Can Automatically Switch Control VESC by Receiver or Bluetooth Module, Can Monitor and Set Parameters with VESC TOOL App on Android or IOS System.
Application: Electric skateboard, electric longboard, motorized mountainboard, efoil, surfboard, boat, etc.,
Diaplay: Voltage, current, temperature , etc.,
Model No.
MTBLEV5 V5 Upgraded version
Features
With optocoupler isolation, industrial grade anti-interference, and wired long distance communication
Upgrade Function
It supports connection together with receiver TXD and RXD to VESC, so it can automatically switch VESC communication with receiver or bluetooth and you don't need to unplug connections. When bluetooth module connect to VESCTOOL App, it will automatically disconnect receiver TXD and TXD, really convenient.
With 6 LED Lights status
power, communication, data tranmission
Compatible Controller Hardware
V4 / V6 / V75 based SuperESC
Compatible Software
VESCTOOL App
Frequency
2.4Ghz
Distance
15m
Input Voltage
3.3-24V
PCB Size
46mm x 32mm
Functions:
1. The bluetooth is developed for communication between controller and VESCTOOL via BLE, to display parameters on mobile phone, so you can monitor real time parameters on app easily.
2. Motor current, duty cycle, ERPM, motor power, motor temperature, battery voltage, battery current, MOS temperature, charging current, charging power, etc., are able to display through the bluetooth module.
3. You can adjust parameters for motor settings, Including General, BLDC, FOC, PID controllers, etc informations.
4. It supports VESCTOOL Compatible controller based on V4, V6.0, V75_300 hardware, please choose the correct hardware version of your controller, we will match compatible cable for you.
5. Firmware is updatable.
VESCTOOL Compatible Speed Controllers:
$47.80$43.02
×
In Stock 2pcs / 5pcs MTS2009AS Max 300A 85V Anti-spark Switch with Short Cirsuit Protection
Maytech MTS2009AS Max 300A 85V Electronic Anti-spark Switch Battery Cutoff Switch with Short Circuit Protection for Electric Hydrofoil Efoil Surfboard
It can cut off positive pole power, much safer when usage and greatly protect your controller and power suppy system.
Specification:
Model No.
MTS2009AS
Max Current
300A
Max Voltage
6-20S Lipo (25-85V), recommend better work under 75V
Size
96.5 x 56 x 25 (mm)
Switch Diameter
12mm
Switch Type
Use NMOS to realize switching on/off Power positive
Connector
With 4pcs Cold-pressed Terminal Connector
Function
Protect your controller and power supply system when brake or startup
Features
First Switch that can cut off positive pole power in the market;
Switch comes with LED light indicator; Shutdown current less than 1uA; Suitable for load: three phase motor speed controller; Boot soft start; Automatic short circuit protection when boot; Automatic short circuit protection when work.
Application
Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, etc.,
Notice when use with VESCTOOL compatible controllers:
Because VESCTOOL compatible controllers has regenerative brake function, when use it with 56V and above battery, recommend to use current mode no brake (Duty cycle mode or current mode with brake are not recommended for voltage ≥56V)
(This is only for reference accoridng to our engineer experience, different ESCs/ Applications might be different)
Related Products: (Click the following pictures to check more products)
Maytech Electric Surfboard / Efoil Kits:
Maytech MTSKR1905WF IP67 Waterproof Remote for Esk8/Esurf:
$423.70$81.00
Scegliendo una selezione si ottiene un aggiornamento completo della pagina.
