Maytech.cn--Maytech official website
45km/h Complete Efoil Board with 58V 35Ah Battery 9KW Motor Plug and Play Electric Hydrofoil Surfboard
45km/h Complete Efoil Board with 58V 35Ah Battery 9KW Motor Plug and Play Electric Hydrofoil Surfboard
픽업 사용 가능 여부를 로드할 수 없습니다.
Complete Efoil Board with 58V 35Ah Battery 9KW Motor Electric Hydrofoil Surfboard Plug and Play
The kit Includes:
1x 70182 8.6KW Waterproof Motor with 7.25*6 inch Propeller with guard
1x 300A ESC built in
1x 2.4Ghz Waterproof Remote
1x 58V 35Ah Battery with charger
1x Carbon Fiber Board
1x Efoil Mast
1x Efoil Wing
**The website price is 1-9set price, if order more than 10sets or group buy quantity more than 10sets could get discount price, if you're interested, please contact us agnes@maytech.cn.
Shipping cost is not included, Sea shipping and Air shipping methods are both available and optional, but sea shipping cost is unstable, so please contact us to check sea shipping cost if you want to ship by sea.
Specifications:
Board Material | Carbon fiber |
Motor Power | 8600W |
Battery Capacity | 35Ah Waterproof Battery,
PANASONICS 21700 battery |
Maximum Speed | 30-45 km/h |
Overall Size | 1670*650*120mm (length*width*height) |
Overall Weight | 15kg without battery, 25kg with battery. Volume weight 110kg (playing a wooden box) |
Battery Cycles | 2000 times |


MTI70182 Waterproof 8.6KW Motor Description:
Share














😍 Handpicked Recommendations
- Esurf/ Efoil Kit Watercooled 85165 Motor + Waterproof 300A ESC+ MTSKR1905WF Remote + 300A 85V Switch + Water Pump
$1,454.20 - +
- Fully Waterproof Efoil Kits with MTI65162 Motor + 300A ESC + 1905WF Remote + MTS2009AS Switch + 12V 30W Water Pump
$1,373.80 - +
- In Stock DIY Waterproof Efoil Kit with Maytech 65162 Motor + 200A VESC Max 75V + 1905WF Remote + 300A Antispark Switch + Water Pump
$1,011.00 - +
- In Stock Efoil Surfboard Kit 65162 Waterproof Motor + 300A 75V MTSPF7.5H + MTSKR1905WF Remote
$1,075.60 - +
- In Stock Esurf Kit Waterproof 85165 Motor + 300A 75V MTSPF7.5H + Waterproof Remote + Anti-spark Switch + Water Pump
$1,158.30 - +
- In Stock Maytech IP67 Waterproof Remote MTSKR1905WF Controller for Esk8/ Esurf/ Efoil
$99.90

Esurf/ Efoil Kit Watercooled 85165 Motor + Waterproof 300A ESC+ MTSKR1905WF Remote + 300A 85V Switch + Water Pump
1. MTSF300A-WP ESC Upgrade Version:
Model No. | MTSF300A-WP |
Cont Current | 300A |
Peak Current | 1000A |
Watercooling | With |
Waterproof Rank | IP68 |
Input Voltage | 6-14S Lipo (25-58.8V) |
Case Material | Aluminum alloy |
Signal Format | PWM, 1ms-2ms |
Connector | 8.0mm female gold-plated bullet connector on 3 motor cables, on battery side without connector. With waterproof protector for connectors |
Features:
- Built in 75V to 5V and 75V to 12V UBEC DC-DC Module, 5V output is for receiver power supply, 12V output is for light and water pump, or other use.
- With waterproof junction box, all functions lead out and with pins in the box, and if you work with Maytech MTSKR1905WF remote, its receiver can be put inside of the box and directly plug in, easier to use and receiver can be waterproofed.
- Both IP68 waterproof and watercooled, which means 2 cooling ways:
- The case can work under seawater because of its IP68 waterproof case; If you don't want to put it underwater, then just cool it with water pump through its cooling tubes.



> Click to get Progcard Manual and Instruction:
2. MTI85165 Inrunner Watercooled Motor
Model No. | MTI85165-200-SF |
KV | 200, if you want other KV, contact agnes@maytech.cn |
Shaft | Screw Shaft |
Input Voltage | 6-12S Lipo (25V-50V) |
Waterproof Rank | Not Waterproof |
Watercooling | With |
Max Current | 300A |
Max Output Power | 10.5KW |
Pole Number | 10 poles |
Max Torque | 15.5N.m |
Connector | 8.0mm male golded-plated bullet connector |
Hall Sensor | Without |
Customize | KV, logo, shaft, cable, connector, cover, case, etc., contact agnes@maytech.cn |


3. Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver
Model No | MTSKR1905WF (V2), upgraded waterproof and signal strength |
Waterproof Rank | IP67 with 2 layers nanometers coating |
Control Mode | Esk8/ Esurf |
Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
Output Signal | Max 3.3V |
Display |
Remote and battery power, signal strength, throttle and brake percentage, RPM; speed, mileage; Current, voltage, temp when work with VESC |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Safety Button | Support |
Cruise Control | With in Esurf Mode |
Brake | With in Esk8 Mode |
Wireless Charging | Yes |
Package Includes | Transmitter, receiver, charging Pad, receiver, wristband, 3pcs dupont cable |
Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., |


4. MTS2009AS Antispark Switch
Model No. | MTS2009AS |
Max Current | 300A |
Input Voltage | 6-20S Lipo (25-85V), recommend better work under 75V |
Swith Diameter | 12mm |
Switch Type | NMOS to realize switching on/off Power positive |
Waterproof | No, please keep the switch in dry space |
Connector | With 4pcs Cold-pressed Terminal Connector |
Function | Protect your controller and power supply system when brake or startup |
Application | Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, Airplane, VTOL, UAV, Dronesetc., |
Features: | Switch comes with LED light indicator; Shutdown current less than 1uA; Suitable for load: three phase motor speed controller; Boot soft start; Automatic short circuit protection when boot; Automatic short circuit protection when work. |



5. Water Pump

Feedback Videos on Efoil:
https://youtu.be/iAedKKE7Er4
https://youtu.be/K4SvMuxpIMo
https://youtu.be/bC3pf8GgMHo
https://youtu.be/8dZ4fjnAdoI
https://youtu.be/ZMIyqY0dZkk
Customer feedback showing you how to DIY Efoil:
https://www.thingiverse.com/thing:4686310
Advice after usage:
1. To expand the products life, please better wipe off the waters on the products and keep them for all dry after everytime use.
2. For this kit of the ESC, because the motor is sensorless, suggest to use the default value in the ESC, we have tested the kit before shipment with the default value, do not suggest to modify the values.
If you have other requirement on motor KV, ESC or other questions, please contact us agnes@maytech.cn

Fully Waterproof Efoil Kits with MTI65162 Motor + 300A ESC + 1905WF Remote + MTS2009AS Switch + 12V 30W Water Pump
Maytech Fully Waterproof Efoil Kits with MTI65162 Motor + 300A ESC + 1905WF Remote + Progcard for Electric surfboard, Efoil, jetfoiler, electric hydrofoil, countercurrent swiming training, etc.,
1. MTSF300A-WP ESC Upgrade Version:
Model No. | MTSF300A-WP |
Cont Current | 300A |
Peak Current | 1000A |
Watercooling | With |
Waterproof Rank | IP68 |
Input Voltage | 6-14S Lipo (25-58.8V) |
Case Material | Aluminum alloy |
Signal Format | PWM, 1ms-2ms |
Connector | 8.0mm female gold-plated bullet connector on 3 motor cables, on battery side without connector. With waterproof protector for connectors |
Features:
- Built in 75V to 5V and 75V to 12V UBEC DC-DC Module, 5V output is for receiver power supply, 12V output is for light and water pump, or other use.
- With waterproof junction box, all functions lead out and with pins in the box, and if you work with Maytech MTSKR1905WF remote, its receiver can be put inside of the box and directly plug in, easier to use and receiver can be waterproofed.
- Both IP68 waterproof and watercooled, which means 2 cooling ways:
- The case can work under seawater because of its IP68 waterproof case; If you don't want to put it underwater, then just cool it with water pump through its cooling tubes.



> Click to get Progcard Manual and Instruction:
2. MTI65162 Inrunner Waterproof Motor
Model No. | MTI65162-120-SF |
KV | 120, if you want other KV, contact agnes@maytech.cn |
Shaft | Screw Shaft |
Input Voltage | 6-14S Lipo (25V-58.8V) |
Waterproof Rank | IP68 |
Max Current | 300A |
Max Output Power | 9KW |
Pole Number | 6 poles |
Max Torque | 10N.m |
Connector | 8.0mm male gold-plated bullet connector |
Hall Sensor | Without |
Propeller | Optional for 120KV |
Customize | KV, logo, shaft, cable, connector, cover, case, etc., contact agnes@maytech.cn |



3. Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver
Model No | MTSKR1905WF (V2), upgraded waterproof and signal strength |
Waterproof Rank | IP67 with 2 layers nanometers coating |
Control Mode | Esk8/ Esurf |
Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
Output Signal | Max 3.3V |
Display |
Remote and battery power, signal strength, throttle and brake percentage, RPM; speed, mileage; Current, voltage, temp when work with VESC |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Safety Button | Support |
Cruise Control | With in Esurf Mode |
Brake | With in Esk8 Mode |
Wireless Charging | Yes |
Package Includes | Transmitter, receiver, charging Pad, receiver, wristband, 3pcs dupont cable |
Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., |


4. MTS2009AS Antispark Switch
Model No. | MTS2009AS |
Max Current | 300A |
Input Voltage | 6-20S Lipo (25-85V), recommend better work under 75V |
Swith Diameter | 12mm |
Switch Type | NMOS to realize switching on/off Power positive |
Waterproof | No, please keep the switch in dry space |
Connector | With 4pcs Cold-pressed Terminal Connector |
Function | Protect your controller and power supply system when brake or startup |
Application | Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, Airplane, VTOL, UAV, Dronesetc., |
Features: | Switch comes with LED light indicator; Shutdown current less than 1uA; Suitable for load: three phase motor speed controller; Boot soft start; Automatic short circuit protection when boot; Automatic short circuit protection when work. |



5. Water Pump

Feedback Videos on Efoil:
https://youtu.be/iAedKKE7Er4
https://youtu.be/K4SvMuxpIMo
https://youtu.be/bC3pf8GgMHo
https://youtu.be/8dZ4fjnAdoI
https://youtu.be/ZMIyqY0dZkk
Customer feedback showing you how to DIY Efoil:
https://www.thingiverse.com/thing:4686310
Advice after usage:
1. To expand the products life, please better wipe off the waters on the products and keep them for all dry after everytime use.
2. For this kit of the ESC, because the motor is sensorless, suggest to use the default value in the ESC, we have tested the kit before shipment with the default value, do not suggest to modify the values.
If you have other requirement on motor KV, ESC or other questions, please contact us agnes@maytech.cn

In Stock DIY Waterproof Efoil Kit with Maytech 65162 Motor + 200A VESC Max 75V + 1905WF Remote + 300A Antispark Switch + Water Pump
DIY Waterproof Efoil Kit with Maytech 65162 Motor + 200A VESC Max 75V + 1905WF Remote + 300A Antispark Switch + Water Pump Set for Efoil, Electric Hydrofoil High Voltage Electric Vehicles, etc.,
Frequently Asked Questions:
- How much voltage can be used for this kit?
-Max voltage can use for this kit is 75V, if use higher motor KV, max voltage can be used is lower.
- Is water pump necessary?
- The controller is both waterproof and watercooled, so it can work underwater directly. If you put it underwater for cooling, water pump is not needed; If you don't want to put it underwater, and want to cool it through its cooling tube, then water pump is needed.
- Is anti-spark switch needed?
- What applications can this kit be used to?
1. Motor: MTI65162-SF Inrunner Sensorless Waterproof Brushless Motor
Model No. | MTI65162-120-SF |
KV | 120, if you want other KV, contact agnes@maytech.cn |
Shaft | Screw Shaft |
Input Voltage | 6-14S Lipo (25V-58.8V) |
Waterproof Rank | IP68 |
Max Current | 300A |
Max Output Power | 9KW |
Pole Number | 6 poles |
Max Torque | 10N.m |
Connector | 8.0mm male gold-plated bullet connector |
Hall Sensor | Without |
Propeller | Optional for 120KV |
Customize | KV, logo, shaft, cable, connector, cover, case, etc., contact agnes@maytech.cn |



2. SPF7.12K-WP 200A 75V VESCTOOL Speed Controller
Model No. | MTSPF7.12K-WP |
Current | 200A |
Waterproof Rank | IP68 Waterproof |
Input Voltage | 6-18S Lipo (25V-75V) |
VESC Hardware | VESC75/300 |
Signal Format | PWM (PPM), UART, ADC |
Case Material | Alloy aluminum case |
Connector | Compatible with motor connector, battery side no connector |
Application | Efoil, foilcart, electric hydrofoil, electric kayak, electric sup board, esurf, underwater scooter, etc., |
Suggested Set in VESCTOOL:
Motor Current Max: ≤200A (According to your motor current)
Absolute Maximum Current: 250A (According to your motor current)
Battery Current Max: ≤100A (According to your battery discharge current)
You can also use default values after "Setup Motors FOC" detection.
The VESC is open source, these values are just for reference based on our engineer experience for your reference.

3. Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver
3. Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver
Model No | MTSKR1905WF (V2), upgraded waterproof and signal strength |
Waterproof Rank | IP67 with 2 layers nanometers coating |
Control Mode | Esk8/ Esurf |
Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
Output Signal | Max 3.3V |
Display |
Remote and battery power, signal strength, throttle and brake percentage, RPM; speed, mileage; Current, voltage, temp when work with VESC |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Safety Button | Support |
Cruise Control | With in Esurf Mode |
Brake | With in Esk8 Mode |
Wireless Charging | Yes |
Package Includes | Transmitter, receiver, charging Pad, receiver, wristband, 3pcs dupont cable |
Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., |
> Get Manual: Remote Manual and Instruction
4. MTS2009AS Antispark Switch
Model No. | MTS2009AS |
Max Current | 300A |
Input Voltage | 6-20S Lipo (25-85V), recommend better work under 75V |
Swith Diameter | 12mm |
Switch Type | NMOS to realize switching on/off Power positive |
Waterproof | No, please keep the switch in dry space |
Connector | With 4pcs Cold-pressed Terminal Connector |
Function | Protect your controller and power supply system when brake or startup |
Application | Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, Airplane, VTOL, UAV, Dronesetc., |
Features: | Switch comes with LED light indicator; Shutdown current less than 1uA; Suitable for load: three phase motor speed controller; Boot soft start; Automatic short circuit protection when boot; Automatic short circuit protection when work. |



5. Water Pump

Feedback Videos on Efoil:
Advice after usage:
1. To expand the products life, please better wipe off the waters on the products and keep them for all dry after everytime use.
2. For this kit of the ESC, because the motor is sensorless, suggest to use the default value in the ESC, we have tested the kit before shipment with the default value, do not suggest to modify the values.
If you have other requirement on motor KV, ESC or other questions, please contact us agnes@maytech.cn

In Stock Efoil Surfboard Kit 65162 Waterproof Motor + 300A 75V MTSPF7.5H + MTSKR1905WF Remote
300A 75V V75_300 based Watercooled Speed Controller + MTI65162 Fully Waterproof Motor + MTSKR1905WF IP67 Waterproof Remote + 300A 85V Anti-spark Switch + Water Pump Set for Efoil, Electric Hydrofoil High Voltage Electric Vehicles, etc.,
Frequently Asked Questions:
- How much voltage can be used for this kit?
-Max voltage can use for this kit is 75V, if use higher motor KV, max voltage can be used is lower.
- Is water pump necessary?
- The controller is both waterproof and watercooled, so it can work underwater directly. If you put it underwater for cooling, water pump is not needed; If you don't want to put it underwater, and want to cool it through its cooling tube, then water pump is needed.
- Is anti-spark switch needed?
- What applications can this kit be used to?
1. Motor: MTI65162-SF Inrunner Sensorless Waterproof Brushless Motor
Model No. | MTI65162-120-SF |
KV | 120, if you want other KV, contact agnes@maytech.cn |
Shaft | Screw Shaft |
Input Voltage | 6-14S Lipo (25V-58.8V) |
Waterproof Rank | IP68 |
Max Current | 300A |
Max Output Power | 9KW |
Pole Number | 6 poles |
Max Torque | 10N.m |
Connector | 8.0mm male gold-plated bullet connector |
Hall Sensor | Without |
Propeller | Optional for 120KV |
Customize | KV, logo, shaft, cable, connector, cover, case, etc., contact agnes@maytech.cn |



2. MTSPF7.5H 300A 75V VESCTOOL Speed Controller
Model No. | MTSPF7.5HK |
Current | 300A |
Waterproof Rank | Not waterproof, with watercooling |
Input Voltage | 6-18S Lipo (25V-75V) |
VESC Hardware | VESC75/300 |
Signal Format | PWM (PPM), UART, ADC |
Case Material | Alloy aluminum case |
Connector | Cold-pressed terminal connector |
Application | Efoil, foilcart, electric hydrofoil, electric kayak, electric sup board, esurf, underwater scooter, etc., |



Model No | MTSKR1905WF (V2), upgraded waterproof and signal strength |
Waterproof Rank | IP67 with 2 layers nanometers coating |
Control Mode | Esk8/ Esurf |
Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
Output Signal | Max 3.3V |
Display |
Remote and battery power, signal strength, throttle and brake percentage, RPM; speed, mileage; Current, voltage, temp when work with VESC |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Safety Button | Support |
Cruise Control | With in Esurf Mode |
Brake | With in Esk8 Mode |
Wireless Charging | Yes |
Package Includes | Transmitter, receiver, charging Pad, receiver, wristband, 3pcs dupont cable |
Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skate |
> Get Manual: Remote Manual and Instruction
4. MTS2009AS Antispark Switch
Model No. | MTS2009AS |
Max Current | 300A |
Input Voltage | 6-20S Lipo (25-85V), recommend better work under 75V |
Swith Diameter | 12mm |
Switch Type | NMOS to realize switching on/off Power positive |
Waterproof | No, please keep the switch in dry space |
Connector | With 4pcs Cold-pressed Terminal Connector |
Function | Protect your controller and power supply system when brake or startup |
Application | Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, Airplane, VTOL, UAV, Dronesetc., |
Features: | Switch comes with LED light indicator; Shutdown current less than 1uA; Suitable for load: three phase motor speed controller; Boot soft start; Automatic short circuit protection when boot; Automatic short circuit protection when work. |



5. Water Pump

Feedback Videos on Efoil:

In Stock Esurf Kit Waterproof 85165 Motor + 300A 75V MTSPF7.5H + Waterproof Remote + Anti-spark Switch + Water Pump
300A 75V V75_300 based Watercooled Speed Controller + MTI85165 Waterproof Inrunner Sensorless Motor + MTSKR1905WF IP67 Waterproof Remote + 300A 85V Anti-spark Switch + Water Pump Set for Efoil, Electric Hydrofoil High Voltage Electric Vehicles, etc.,
Frequently Asked Questions:
- How much voltage can be used for this kit?
- Is water pump necessary?
- The controller is watercooled, not fully waterproof, so if you will use this for water sports like Efoil, surfboard, then please better order together with the water pump for cooling.
- Is anti-spark switch needed?
- What applications can this kit be used to?
- Set in VESCTOOL:
The VESC is open source, these values are just for reference based on our engineer experience for your reference.
Specifications:
-Motor: MTI85165-WP Inrunner Sensorless Waterproof Brushless DC Motor
Model No. | MTI85165-200-WP | KV | 200 |
Internal Resistance | 0.0322Ω | Max Current | 300A |
Input Volt | 25-50V | Max Output Watt | 10.5KW |
Max Pull | 15.5 N.m | Idle Current | 2.1A/8.4V |
Motor Size | 85X167.2mm | Shaft | Screw Shaft/ Keyway shaft |
Cable Length | 1m | Plug Size | See Drawing |




-MTSPF7.5H 300A 75V VESCTOOL Compatible Speed Controller SUPERFOC ESC
The VESC is open source, these values are just for reference based on our engineer experience for your reference.

1.AUX port to supply 12V and 5V to external device;
2.PPM port to connect PPM transceivers;
3.CAN Port for CAN communication with other devices and VESC arrays;
4.Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
5.SWD port to get direct access to the Chipset. Diagnostics, debugging, and real time data;
6.COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
7.USB port for programming.


-Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver
Item | MTSKR1905WF (V2) |
Waterproof Rank | IP67 Waterproof with 2 Layers Nanometers Coating |
Control Mode | Esk8/Esurf |
Signal | PWM (PPM) |
PWM Signal Output Range: | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built in BEC or extra 5V power |
UART | Acceptable |
Display | Remote and battery power, signal strength, throttle and brake percentage, RPM, speed, mileage; Current, voltage, |
Firmware Updatable | Yes |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Set Safety Button | Acceptable |
Brake Button | Yes |
Cruise Control | Yes, in Esurf mode |
Wireless Charging | Yes |
Accessories | Charging Pad; Receiver; 3pcs Dupont Cables |


-MTS2009AS Anti-spark Switch 300A 85V
Model No. |
MTS2009AS |
Max Current |
300A |
Max Voltage |
25V-80V |
Size |
96.5 x 56 x 25 (mm) |
Switch Diameter |
12mm |
Switch Type |
Use NMOS to realize switching on/off Power positive |
Connector | With 4pcs Cold-pressed Terminal Connector |
Function | Protect your controller and power supply system when brake or startup |
Features |
First Switch that can cut off positive pole power in the market; Switch comes with LED light indicator; |
Application | Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, etc., |

-Water Pump + DC-DC Power Supply System


In Stock Maytech IP67 Waterproof Remote MTSKR1905WF Controller for Esk8/ Esurf/ Efoil
Specification:
Model No | MTSKR1905WF (V2), upgraded waterproof and signal strength |
Waterproof Rank | IP67 with 2 layers nanometers coating |
Control Mode | Esk8/ Esurf |
Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
Output Signal | Max 3.3V |
Display |
Remote and battery power, signal strength, throttle and brake percentage, RPM; speed, mileage; Current, voltage, temp when work with VESC |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Safety Button | Support |
Cruise Control | With in Esurf Mode |
Brake | With in Esk8 Mode |
Wireless Charging | Yes |
Package Includes | Transmitter, receiver, charging Pad, receiver, wristband, 3pcs dupont cable |
Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., |
Features:
1. Display speed (km/h or mph) in Esk8 mode (for electric skateboard)2. Display voltage in V, current, temperature when work with VESC based controller
> Get Manual: Remote Manual and Instruction
Click Here: How to Display Volt, Current, RPM with TX and RX?


The remote has 2 Modes, signal output pulse width is different in 2 modes:
- Esurf Mode is 1ms-2ms, no stop no brake, if you use Esurf mode to work with VESCTOOL compatible controller, please use below settings in VESCTOOL and to match with the remote:
PPM Control Type: Current no reverse
PPM Mapping: Pulselength Start: 1.1ms; Pulselength End: 1.9ms; Pulselength Center: 1.5ms
Or you can use wizard mode to detect compatible value.
- Esk8 Mode is 1.5ms-1ms (Brake), 1.5ms-2ms (Speed up), 1.5ms is stop position.
Please noted to match compatible parameters for different modes in VESC_TOOL.


Tips After Using:


