compound RSS

1. If a vehicle does not need mechanical brakes, but must be able to brake, it must use electronic brakes. The principle is that the kinetic energy on the motor and the load can be used as a generator through the DC motor to convert the kinetic energy into electrical energy. Then the electric energy is consumed by heating and charging.   2. The electric energy that is emitted must not only charge the battery, but also release the heat. What is the process? 2.1 At this time, VESC has to make a distribution, which current is used to charge...

Read more

How to Install Motor on MTSKT310DB Dual Belt-driven Truck? Check below Video: New Gravity Casting Technology: 1. Aluminum liquid flow into truck mould by liquid's weight naturally, this way can delete mould's inside air clearly.2. do heat treatment after demoulding (truck surface is a little rough because of heat treatment). Prouction time is longer than old die casting technology, and the production cost is twice than before.3. Hardness reached out HRB65 around, which can stand over 150kg weight for professional skateboarders.     Compatible Motor: 5055/5065/6355/6365/6374 Motor Mount: 30mm and 44mm hole distance  1. Maytech Brushless Outrunner Sensored Motors 2....

Read more

MTSKR2005WF is designed only for electric skateboard application, please do not use for electric surfboard.  Difference between MTSKR1905WF and MTSKR2005WF, check below chart: Can I use the MTSKR2005WF on electric surfboard? No, MTSKR2005WF only has Esk8 mode, don't have Esurf mode, no cruise control mode; Besides, MTSKR2005WF remote is only IP67 waterproof, enough for electric skateboard usage, but not enough for electric surfboard, MTSKR1905WF inside circuit is not only with glued, but also with nanometer coating double waterproof, and the screen is with 2 layers waterproof screen; At last, the throttle Zero is different, can't compatible with Esurf application. 

Read more

Some customers may ask: I still can't successful connect VESC to VESC_TOOL after VESC driver is installed, what should I do? After VESC driver is installed, doesn't mean the VESC is successfully installed, you need to choose correct virual serial port number in VESC_TOOL, if the virtual port number choose incorrect, still can't correct, check below steps: 1. When you first connect VESC to VESC_TOOL or when firmware is updated, driver will be installed automatically, please make sure your computer has network. (If the driver does not installed automatically, check former article,3 Ways to Install VESC Driver?) 2. After driver...

Read more