Esurf / Boat Kit: Waterproof 120116 Motor 18.8KW 500A Waterproof ESC MTSKR1905WF Remote Water Pump
In this kit, the ESC can use max voltage is 14S Lipo (58.8V)
And motor can withstand max about 10000 RPM, so if use 200KV, please use voltage under 50V.
-Motor: MTI12016-WP Waterproof Sensorless Inrunner BLDC Motor
100KV Test Datasheet:
-ESC: MTSF500A-WP Waterproof & Watercooled 300A ESC Speed Controller, with Internal DC-DC Module (Convert from 18-75V to 5V, power for receiver)
Please note: ESC has been upgraded with a waterproof junction box as beow picture:
- Can I put the ESC underwater directly? Is it ok to work in sea water?
--Yes, the ESC is with waterproof case, you can put underwater directly, it can use work in sea water, but because sea water has corrosion, to expand the ESC lifespan, please use fresh water to clean the sea water on the surface, and put the ESC for all dry for next time use.
- I don't want to put the ESC underwater directly, what should I do?
--If you don't want to put the ESC underwater, don't worry, it's also watercooled, you just need to connect a water pump to cooling the ESC, and if so, please order the kit with 2 sets water pump, each motor pump can only cool for 1 item, in this kit the motor is watercooled also needs water pump for cooling.
-Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver
|Waterproof Rank||IP67 Waterproof with 2 Layers Nanometers Coating|
|Signal Format||PWM (PPM)|
|Signal Output Range||1-2ms|
|Double Source Power Supply||Accept 5V power by ESC built in BEC or extra 5V power|
|Control Pump||Yes (Relay Switch)|
|Control Light||Yes (Transistor Switch)|
|Set Safety Button||Acceptable|
|Cruise Control||Yes, in Esurf mode|
|Accessories||Charging Pad; Receiver; 3pcs Dupont Cables|
-Water Pump Set: MTWP30A+MTUBEC6.12 12V 30W Water Pump Set with Power Supply
Bench Test with 120116 Motor:
Related Products: Click the folloing picture to check more details:
Waterproof / Watercooled Esurf Kit with 18.8KW 120116 Motor + 300A ESC + MTSKR1905WF