Maytech Fully Waterproof Esurf/Boat Kit MTI120116-WP+MTSF300A-OPTO-WP+MTSKR1905WF+Water Pump Set+MTS2009AS 300A 80V Anti-spark Switch

Maytech IP68 Waterproof 120116 Motor+MTSF300A-WP 14S ESC Controller+MTSKR1905WF IP67 Remote + 12V 30W Water Pump Set + MTS2009AS 300A 80V Anti-spark Switch for Electric Surfboard/ Jetboard/ Jetsurf/ Electric Hydrofoil/ Water Bike/ Kayak, etc., 

Different Options:

1. MTI120116-WP+MTSF300A-WP (Internal or External Receiver)+MTSKR1905WF

2. MTI120116-WP+MTSF300A-WP (Internal or External Receiver)+MTSKR1905WF+Water Pump Set

3. MTI120116-WP+MTSF300A-WP (Internal or External Receiver)+MTSKR1905WF+MTS2009AS Anti-spark Switch

4. MTI120116-WP+MTSF300A-WP (Internal or External Receiver)+MTSKR1905WF+MTS2009AS Anti-spark Switch+Water Pump Set

How to choose ESC Version?

Table Test:

4 Options:

1. MTI120116-100-WP + MTSKR1905WF + MTSF300A-OPTO-WP (Internal Receiver)

2. MTI120116-100-WP + MTSKR1905WF + MTSF300A-OPTO-WP (No Receiver)

3. MTI120116-100-SF + MTSKR1905WF + MTSF300A-OPTO-WP (Internal Receiver)

4. MTI120116-100-SF + MTSKR1905WF + MTSF300A-OPTO-WP (No Receiver)

Noted Please: 

-ESC: MTSF300A-WP Waterproof & Watercooled 300A ESC Speed Controller Internal/ External MTSRR1905 Receiver

Model No.:  MTSF300A-WP

Cont Current: 300A

Max Current: 1000A

Waterproof Rank: IP68 Waterproof

Watercooling: Yes, with

Input Volt: 6-14S Lipo (24V-58.8V)

BEC: Internal with 18-75V convert to 5V DC-DC Module

Signal Format: PWM (PPM)

Signal Output: 1-2ms

Case Material: Alloy aluminum case

Connector: Standard is 8.0mm golden female connector on motor cable side, battery size is not with connector, with IP68 waterproof case for connector. 

Upgraded Notice for ESC Since July 29, 2022.: 

1. Internal receiver type: upgrade with waterproof junction box for wirings and default 1m antenna, more convenient to use, if you don't want to 1m antenner or want longer antenna (we also have 3m), please leave note when make order. 

2. No receiver type: upgrade with waterproof junction box as below picture: 

How to choose ESC Version?

1) MTSF300A-WP with Internal Receiver: Can only work with Maytech remote MTSKR1905WF, the wiring had been wired by our engineer, more convenient to use. 

If you put the ESC near the top of your board and can lead the receiver terminal out of water, then you can choose this version.

(Standard lead out antenna length is 10cm, we also have 1m antenna and 3m antenna, if you need to put longer antenna into the ESC, please order the antenna length you need here:  1m/3m Antenna , leave a note that you want to put longer antenna into ESC)

2) MTSF300A-WP No receiver: Can work with other receiver and remote, more flexible. If you will put the ESC at the bottom of your board and underwater, suggest to choose this version.

Questions You May Ask:  

• Can I put the ESC underwater directly? Is it ok to work in sea water?

     --Yes, the ESC is with waterproof case, you can put underwater directly, it can use work in sea water, but because sea water has corrosion, to expand the ESC lifespan, please use fresh water to clean the sea water on the surface, and put the ESC for all dry for next time use. 

• I don't want to put the ESC underwater directly, what should I do?

    --If you don't want to put the ESC underwater, don't worry, it's also watercooled, you just need to connect a water pump to cooling the ESC. 

PS: The antenna terminal must be lead out of water, so please choose suitable version according to your needs.

Progcard Manual and Instruction: 

https://cdn.shopify.com/s/files/1/0089/3065/6320/files/MTSF300A_ESC_progcard-ha_manual_1.pdf?v=1622798729

-Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver

Item	MTSKR1905WF (V2)
Waterproof Rank	IP67 Waterproof with 2 Layers Nanometers Coating
Control Mode	Esk8/Esurf
Signal	PWM (PPM)
Double Source Power Supply	Accept 5V power by ESC built in BEC or extra 5V power
Firmware Updatable	Yes
Control Pump	Yes (Relay Switch)
Control Light	Yes (Transistor Switch)
Set Safety Button	Acceptable
Brake Button	Yes
Cruise Control	Yes, in Esurf mode
Wireless Charging	Yes
Accessories	Charging Pad; Receiver;     3pcs Dupont Cables

Water Pump and Its Power Supply: 

MTS2009AS 300A 80V Anti-spark Switch (Can cut off positive pole power)

Model No.	MTS2009AS
Max Current	300A
Max Voltage	25V-80V
Connector	With 4pcs Cold-pressed Terminal Connector
Function	Protect your controller and power supply system when brake or startup
Features	First Switch that can cut off positive pole power in the market;
Application	Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, etc.,

Feedback Videos on Efoil/Jetsurf:

https://youtu.be/STfrbRvz5xI

https://youtu.be/iAedKKE7Er4

https://youtu.be/K4SvMuxpIMo

https://youtu.be/bC3pf8GgMHo

https://youtu.be/8dZ4fjnAdoI

https://youtu.be/ZMIyqY0dZkk

Advice for Usage:

1. To expand the products life, please better wipe off the waters on the products and keep them for all dry after everytime use. 

2. For this kit of the ESC, because the motor is sensorless, suggest to use the default value in the ESC, we have tested the kit before shipment with the default value, do not suggest to modify the values. 

About Stock: 

1. Standard stock for the motor is 100KV and shaft as picture, if you need 200KV or other KV or other shaft, lead time is about 45-90 days after your order confirmed, and please contact us agnes@maytech.cn to tell us your requirement. 

2. The standard stock is also limited, please confirm your order asap, and if you need very urgent, please contact us agnes@maytech.cn to check stock first. 

Related Products: Click the following pictures to check more specs:

Waterproof Efoil Kit with 65162 motor+ Waterproof 300A ESC+ MTSKR1905WF: 

Watercooled Efoil Kit with 65162 motor+ Watercooled 300A ESC + MTSKR1905WF + Progcard + UBEC

 

  Waterproof / Watercooled Esurf Kit with 10.5KW 85165 Motor + 300A ESC + MTSKR1905WF