1 18

Maytech.cn

In Stock Esurf Kit Waterproof 85165 Motor + 300A 75V MTSPF7.5H + Waterproof Remote + Anti-spark Switch + Water Pump

In Stock Esurf Kit Waterproof 85165 Motor + 300A 75V MTSPF7.5H + Waterproof Remote + Anti-spark Switch + Water Pump

$1,158.30 USD
$1,158.30 USD
En vente Épuisé
Frais d'expédition calculés à l'étape de paiement.
Remote
Motor Shaft
Antispark Switch and Water Pump

300A 75V V75_300 based Watercooled Speed Controller + MTI85165 Waterproof Inrunner Sensorless Motor + MTSKR1905WF IP67 Waterproof Remote + 300A 85V Anti-spark Switch + Water Pump Set for Efoil, Electric Hydrofoil High Voltage Electric Vehicles, etc.,

Frequently Asked Questions: 

How much voltage can be used for this kit? 

- If you use 200KV mtotor, max voltage can use is 50V, if you use 100KV, max voltage can use is 75V. 

Is water pump necessary?  

  - The controller is watercooled, not fully waterproof, so if you will use this for water sports like Efoil, surfboard, then please better order together with the water pump for cooling. 

Is anti-spark switch needed? 

- Anti-spark switch function is to protect your battery and VESC systems from damaged by power surges when startup and power up, especially when use high voltage, so anti-spark switch is recommended. Our MTS2009AS anti-spark switch can also cut off positive pole power, save your battery power and more convenient to use. 

What applications can this kit be used to?

- Efoil, electric hydrofoil, electric boat, electric kayak, electric motorcycle, ev car, agv car, heavy duty cargo robots, electric water sports, counter current swimming machine, etc.,

Set in VESCTOOL:

Motor Current Max: ≤300A (According to your motor current)
Absolute Maximum Current: 350A (According to your motor current)
Battery Current Max: ≤150A (According to your battery discharge current)
You can also use default values after "Setup Motors FOC" detection.
The VESC is open source, these values are just for reference based on our engineer experience for your reference.

-Motor: MTI85165-WP Inrunner Sensorless Waterproof Brushless DC Motor

Model No.  MTI85165-200-WP KV 200
Internal Resistance 0.0322Ω Max Current  300A
Input Volt 25-50V Max Output Watt 10.5KW
Max Pull 15.5 N.m Idle Current  2.1A/8.4V
Motor Size 85X167.2mm Shaft  Screw Shaft/ Keyway shaft 
Cable Length 1m Plug Size See Drawing

maytech 85165 waterproof sensorless inrunner motor, powerful engine, electric surfboard duty robot car, ev car, electric vehicles


MTI85165-200-SF watercooled 200KV sensorless inrunner bldc motor for electric surfboard efoil rc boat electric kayak
MTI85165-200-SF watercooled 200KV sensorless inrunner bldc motor for electric surfboard efoil rc boat electric kayak

maytech 65162 motor production procedures, factory, manufacturer for waterproof motor, manufacturer for inrunnner brushless motors

-MTSPF7.5H 300A 75V VESCTOOL Compatible Speed Controller SUPERFOC ESC

Model No.:  MTSPF7.5H
Current: 300A
Waterproof Rank: Non waterproof 
Watercooling: Yes, with 
Input Volt: 6-18S Lipo (25V-75V)
Based hardware: V75_300
VESC_TOOL Compatible: Yes
Signal Format: PWM (PPM), UART
Case Material: Alloy aluminum case
Connector: Cold-pressed Terminal Connector

Set in VESCTOOL:
Motor Current Max: ≤300A (According to your motor current)
Absolute Maximum Current: 350A (According to your motor current)
Battery Current Max: ≤150A (According to your battery discharge current)
You can also use default values after "Setup Motors FOC" detection.
The VESC is open source, these values are just for reference based on our engineer experience for your reference.

High voltage 85V electric speed controller 300A max 1000A electric surfboard jetsurf jetski electric skateboard electric mountainboard
Ports definitions:
1.AUX port to supply 12V and 5V to external device;
2.PPM port to connect PPM transceivers;
3.CAN Port for CAN communication with other devices and VESC arrays;
4.Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
5.SWD port to get direct access to the Chipset. Diagnostics, debugging, and real time data;
6.COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
7.USB port for programming.
High voltage 85V electric speed controller 300A max 1000A electric surfboard jetsurf jetski electric skateboard electric mountainboard

High voltage 85V electric speed controller 300A max 1000A electric surfboard jetsurf jetski electric skateboard electric mountainboard

3. MTSKR1905WF IP67 waterproof remote

Model No MTSKR1905WF
Waterproof Rank IP67 double waterproof
Thr Mode ESURF (SF) and ESK8 (SK)
3 Speed Modes With, adjust throttle % from 20-100%
Power Modes 2 levels, Eco (Level 1) < Pro (Level 2)
Throttle Lock Yes, 10-30S optional
Signal Format Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. 
PWM Signal Output Range 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. 
Double Source Power Supply Accept 5V power by ESC built-in BEC or extra 5V power
Output Signal Max 3.3V
Display Parameters

Current, voltage, temperature only when work with VESC or Maytech MTSF300A-WP32 ESC;
Signal strength, remote and battery power bars, battery voltage, RPM with VESC and other ESCs
Control Pump Yes (Relay Switch)
Control Light Yes (Transistor Switch)
Safety Button Support
Cruise Control With in Esurf Mode
Brake With in Esk8 Mode
Accessories Wirelss charging pad / Receiver / USB cable / Wristband / 3pcs Dupond cable
Compatible Controllers VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. 
Application foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc.,

> Get E-Manual: Remote Manual and Instruction

> Check Video Using Instruction

Click Here: How to Display Volt, Current, RPM with TX and RX? 


Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoil

Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoilMTSKR1905WF V2 Maytech remote, waterproof remote, Esk8 remote, esurf remote, efoil remote, IP67 waterproof



-MTS2009AS Anti-spark Switch 300A 85V

Model No.

MTS2009AS

Max Current

300A

Max Voltage

25V-80V

Size

 96.5 x 56 x 25 (mm)

Switch Diameter

12mm

Switch Type

Use NMOS to realize switching on/off Power positive
Connector With 4pcs Cold-pressed Terminal Connector
Function Protect your controller and power supply system when brake or startup
Features

First Switch that can cut off positive pole power in the market;

Switch comes with LED light indicator;
Shutdown current less than 1uA;
Suitable for load: three phase motor speed controller;
Boot soft start;
Automatic short circuit protection when boot;
Automatic short circuit protection when work.
Application Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, etc., 

Maytech 300A electric switch protection for electric skateboard elimanite sparks when connection high current high power switch antispark switch on and off switch

-Water Pump + DC-DC Power Supply System

water pump for electric surfboard esurf efoil jetski jetfoiler for electric efoiling 12V 30W water pump

40W DC-DC Converter Input 40-160V Output DC 48V Step Down Module UBEC
Feedback Videos on Efoil:
Advice after usage: 
1. To expand the products life, please better wipe off the waters on the products and keep them for all dry after everytime use. 
2. For this kit of the ESC, because the motor is sensorless, suggest to use the default value in the ESC, we have tested the kit before shipment with the default value, do not suggest to modify the values. 

If you have other requirement on motor KV, ESC or other questions, please contact us agnes@maytech.cn




 

 


Afficher tous les détails
Variante Total des variantes Quantité Prix Total des variantes
With / Screw Shaft / Both With
With / Screw Shaft / Both With
$1,158.30/pièce		 $0.00
$1,158.30/pièce $0.00
With / Screw Shaft / With Switch No Pump
With / Screw Shaft / With Switch No Pump
$1,099.70/pièce		 $0.00
$1,099.70/pièce $0.00
With / Screw Shaft / With Pump No Switch
With / Screw Shaft / With Pump No Switch
$1,069.10/pièce		 $0.00
$1,069.10/pièce $0.00
With / Screw Shaft / Both Without
With / Screw Shaft / Both Without
$1,010.50/pièce		 $0.00
$1,010.50/pièce $0.00
With / Keyway Shaft / Both With
With / Keyway Shaft / Both With
$1,158.30/pièce		 $0.00
$1,158.30/pièce $0.00
With / Keyway Shaft / With Switch No Pump
With / Keyway Shaft / With Switch No Pump
$1,099.70/pièce		 $0.00
$1,099.70/pièce $0.00
With / Keyway Shaft / With Pump No Switch
With / Keyway Shaft / With Pump No Switch
$1,069.10/pièce		 $0.00
$1,069.10/pièce $0.00
With / Keyway Shaft / Both Without
With / Keyway Shaft / Both Without
$1,010.50/pièce		 $0.00
$1,010.50/pièce $0.00
Without / Screw Shaft / Both Without
Without / Screw Shaft / Both Without
$912.60/pièce		 $0.00
$912.60/pièce $0.00
Without / Keyway Shaft / Both Without
Without / Keyway Shaft / Both Without
$912.60/pièce		 $0.00
$912.60/pièce $0.00
Voir le panier

0

Total des articles

$0.00

Sous-total des produits

Taxes, réductions et frais d’expédition calculés à l’étape du paiement
Voir le panier