Pre-Order Maytech DIY Foil Assist System Kit with 3.5KW 6374 Waterproof Motor + 100A V6 based VESC Controller + MTSKR1905WF Waterproof Remote

  • Sale
  • Regular price $397.70
Shipping calculated at checkout.

Wholesale / Customize / Questions

Maytech DIY Foil Assist System Kit with 3.5KW 6374 Waterproof Motor + 100A V6 based VESC Controller + MTSKR1905WF Waterproof Remote for Underwater Thruster/ Wing Foil/ Wind Foil/ Sup Board, etc., 

Application: 

DIY foil assist on wing foil, wind surf foil, sup foil board, kite foil, underwater thruster, hull cleaning device, underwater rov, underwater cleaning robot, boat cleaner, quariums or submerged environments, tank cleaning, underwater drone, etc., 

Aiming to convert non-electric foil boards to electric foil easily with reasonable cost. 

 

1. 6374 waterproof motor, No Stock, Pre-order


Model No
MTO6374-150-WPC Motor
KV
150
Idle Current
0.8A
Max Current
65A
Input Voltage
3-12s Lipo (12-50V)
Rated Current
60A
Max Output Watt
3550W
Shaft
8mm, no output shaft
Hall Sensor
Without Waterproof Rank
 IPX8
Mounting Hole Pattern 28mm, 30mm, 44mm Hole distance Mounting Hole Diameter M4
Bearing Ceramic bearing, better waterproof Customize KV, logo, shaft, mounting hole pattern, color, connector, cable, etc.,
 



waterproof 6374 motor for DIY foil assistant foilboard foil drive electric propulsion system for wing foil, windsurf, kite foil, etc.,

waterproof 6374 motor for DIY foil assistant foilboard foil drive electric propulsion system for wing foil, windsurf, kite foil, etc.,waterproof 6374 motor for DIY foil assistant foilboard foil drive electric propulsion system for wing foil, windsurf, kite foil, etc.,

2. MTSPF60100 100A VESC Upgrade Version based on VESC6.0 Hardware with Heat Sink: 

 Model No. MTSPF60100 VESC Controller Cont Current 100A
Input Voltage
3-12S Lipo (12.6V-50V)
Burst Current 240A
Hardware VESC6.0 Software VESCTOOL Compatible
Firmware Updatable Heat Sink With, attach to mosfet, better heat dissipation


maytech mtspf60100 upgraded 100A VESC based on VESC6.0 hardware updatable for foil drive foil assist system electric propulsion wing foil board kite foil sup foilmaytech mtspf60100 upgraded 100A VESC based on VESC6.0 hardware updatable for foil drive foil assist system electric propulsion wing foil board kite foil sup foil

3. MTSKR1905WF IP67 waterproof remote

Stock Notice: the remote was just sold out, new batch is in production, will be ready in May. 

Model No.: MTSKR1905WF (V2)

Waterproof Rank: IP67 with 2 layers nanometers coating

Control Mode: Esk8/ Esurf

Signal Format: Standard PWM (PPM), output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. 

PWM Signal Output Range: 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. 

UART: Acceptable

Double Source Power Supply: Accept 5V power by ESC built-in BEC or extra 5V power

Output Signal: Max 3.3V

Display: Remote and battery power, signal strength, throttle and brake percentage, RPM, speed, mileage; Current, voltage, 

Firmware Updatable: Yes

Control Pump: Yes (Relay Switch)

Control Light: Yes (Transistor Switch)

Set Safety Button: Yes

Cruise Control: With in Esurf Mode

Brake: With in Esk8 Mode

Wireless Charging: Yes

What comes in the package: Charging Pad, receiver, wristband, 3pcs dupont cable

Compatible Controllers: VESCTOOL Compatible/ Focbox/ Other PWM ESCs that has same signal output range with the remote. 

Application: foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc.,

 

Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoil

Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoilMTSKR1905WF V2 Maytech remote, waterproof remote, Esk8  remote, esurf remote, efoil remote, IP67 waterproof

Stock Notice Before Place Order:

1. The motor 150KV is in limited stock,  so please confirm your order asap, or please contact us agnes@maytech.cn to check stock first if you need very urgently.
KV can be customized, if you want to customize, we can do for you, please contact us for the KV you want. 

2. Shipping time is about 24 working hours after your order confirmed for stock item, if not in stock, lead time is about 30-40 days.

3. Motor wire leads out position is specific, if wind one more circle or one less circle, the KV would differ much, hard to make exact KV, so each motor might has ±5%-10% tolerance, this is normal.

 

Related Products: (Click the following pictures to check more products)

 

 

Maytech VESC_TOOL Compitable Controller:

Maytech Benjamin Vedder bruhsless VESC electric speed controller SUPER ESC dual vesc

Maytech MTS1810AS 12S 180A Antispark Switch

MTS1810AS 12S 50V 180A antispark switch small size eliminate surge current when startup and brake, protection for ESC and battery