In Stock Maytech DIY Foil Boost Kit with 3.5KW 6374 Waterproof Motor + 100A V6 based VESC Controller + MTSKR1905WF Waterproof Remote
In Stock Maytech DIY Foil Boost Kit with 3.5KW 6374 Waterproof Motor + 100A V6 based VESC Controller + MTSKR1905WF Waterproof Remote
DIY foil assist on wing foil, wind surf foil, sup foil board, kite foil, underwater thruster, sup foil assist, paddle assist, wind foil board, sup board, downwind, hull cleaning device, underwater rov, underwater cleaning robot, boat cleaner, quariums or submerged environments, tank cleaning, underwater drone, etc.,
Aiming to convert non-electric foil boards to electric foil easily with reasonable cost.
Click Here: How to Display Volt, Current, RPM with TX and RX?
1. 6374 waterproof motor, In Stock
Model No | MTO6374-150-WPC or MTO6374-150-WPC2 |
KV | 150, can customize, contact maytech@maytech.cn if you want other KV |
Idle Current | 0.8A |
Max Current | 65A |
Rated Current | 60A |
Input Voltage | 3-12S Lipo (12-50V) |
Max Output Watt | 3550W |
Shaft | No output shaft |
Hall Sensor | Without |
Waterproof Rank | IPX8 |
Mounting Hole Pattern | 28mm, 30mm, 44mm Hole distance |
Mounting Hole Diameter | M4 |
Cable Length |
Ceramic Bearing motor is with 240mm long cables; Stainless stell bearing motor is with 1m long cables. |
Bearing | Ceramic bearing or Stainless stell bearing |
Customize | KV, logo, shaft, mounting hole pattern, color, connector, cable, etc. contact maytech@maytech.cn |
Notice about Cable Length:
Ceramic Bearing motor is with 240mm long cables;
Stainless stell bearing motor is with 1m long cables.
2. MTSPF60100 100A VESC Upgrade Version based on VESC6.0 Hardware with Black oxidized Heat Sink:
Model No. | MTSPF60100 VESC Controller |
Input Voltage | 3-12S Lipo (12.6V-50V) |
Hardware | VESC6.0 |
Firmware | Updatable |
Cont Current | 100A |
Burst Current | 240A |
Software | VESCTOOL Compatible |
Heat Sink | With, attach to mosfet, better heat dissipation |
Waterproof | No, not waterproof, please do good waterproof job if you use it for water sports |
3. MTSKR1905WF IP67 waterproof remote
Model No | MTSKR1905WF (V2), upgraded waterproof and signal strength |
Waterproof Rank | IP67 with 2 layers nanometers coating |
Control Mode | Esk8/ Esurf |
Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
Output Signal | Max 3.3V |
Display |
Remote and battery power, signal strength, throttle and brake percentage, RPM; speed, mileage; Current, voltage, temp when work with VESC |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Safety Button | Support |
Cruise Control | With in Esurf Mode |
Brake | With in Esk8 Mode |
Wireless Charging | Yes |
Package Includes | Transmitter, receiver, charging Pad, receiver, wristband, 3pcs dupont cable |
Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., |
4. Customer's Feedbacks !
Stock Notice Before Place Order:
1. The motor 150KV is in limited stock, so please confirm your order asap, or please contact us agnes@maytech.cn to check stock first if you need very urgently.2. Shipping time is about 24 working hours after your order confirmed for stock item, if not in stock, lead time is about 30-40 days.
3. Motor wire leads out position is specific, if wind one more circle or one less circle, the KV would differ much, hard to make exact KV, so each motor might has ±5%-10% tolerance, this is normal.