How to Choose Motor, Controller, Remote to Build Your DIY Foil Assist Board?

How to Choose Motor, Controller, Remote to Build Your DIY Foil Assist Board?

Foil assist has become more and popular among foil surfer enthisiast because its portable and easy to carry, cost-effective, make sure you can also foil easily when there's no wind or wave. 

And to build your own DIY foil assist, electronic parts are very important: 

 

Choosing the right motor, controller, and remote for a foil assist board is important. There are many factors to consider, including the size and weight of the board, the desired speed and torque of the motor, and the range and reliability of the remote control. Here are some general guidelines to follow:

  1. Power and Speed: Choose a motor that can provide enough power and speed to suit your needs. The power will depend on the size and weight of the board, as well as the desired speed. A motor with a power rating of at least 500 watts is typically sufficient for most foil assist boards. The speed will depend on the motor’s Kv rating (RPM per Volt), which should be chosen based on the desired top speed.

  2. Controller: The controller should be compatible with the chosen motor and provide enough current to power the motor. It should also have an appropriate voltage range that matches the battery and motor voltage. Choose a controller with a high-efficiency rating for maximum battery life and minimal heat generation.

  3. Remote: The remote control should be reliable and have a decent range for the board’s intended use. It should also be comfortable and easy to use, with intuitive controls for speed and braking. Look for a waterproof remote with a rechargeable battery for convenience.

 

In summary, choosing the right motor, controller, and remote for a foil assist board requires careful consideration of the board’s size and weight, desired speed and torque, and usage conditions. It may be helpful to consult with an experienced manufacturer or supplier to ensure that you select components that work together well and provide maximum performance and reliability.

 

And as request of customers, we specially developed a foil assist kit with waterproof 6374 motor, 100A VESC6 Controller  combine with our Upgrading V2 MTSKR1905WF waterproof remote as main electronic parts, next we will also build compatible propeller.
If you also need battery, you can contact us for the battery you want, we can also recommend suitable one for you. 

 

Email: agnes@maytech.cn

Whatsapp: +8613575977294 

Retour au blog