Aiming to convert non-electric foil boards to electric foil easily with reasonable cost.
V5 Bluetooth Module:
Model No.
MTBLEV5 V5 Upgraded version
Features
With optocoupler isolation, industrial grade anti-interference, and wired long distance communication
Upgrade Function
It supports connection together with receiver TXD and RXD to VESC, so it can automatically switch VESC communication with receiver or bluetooth and you don't need to unplug connections. When bluetooth module connect to VESCTOOL App, it will automatically disconnect receiver TXD and TXD, really convenient.
With 6 LED Lights status
power, communication, data tranmission
Compatible Controller Hardware
V4 / V6 / V75 based SuperESC
Compatible Software
VESCTOOL App
Frequency
2.4Ghz
Distance
15m
Input Voltage
3.3-24V
PCB Size
46mm x 32mm
V2 Bluetooth Module:
Model No.
MTBLEV2 V2 Version
With 3 LED Lights status
power, communication, database
Compatible Controller Hardware
V4 / V6 / V75 based SuperESC
Compatible Software
VESCTOOL App
Frequency
2.4Ghz
ARM Processor
ARM Cortex-M0 32 bit processor 256kB flash&16kB RAM
PCB Size
41mm x 21mm
Net Weight
5g
Antenna Length
90mm
Recommend Products: Click below pictures to check more information
Brushless Outrunner Motors:
$0$111.60
×
In Stock Maytech Electric Skateboard Splashproof Remote Control MTSKR2005WF IP66 2.4GHZ
Maytech MTSKR2005WF IP66 Splashproof Esk8 Remote Electric Skateboard Elongboard Hand Remote with 3 Speed Modes
Notice:
This remote is splashproof, can only use for electric skateboard, mountainboard, elongboard, please do not use for any water sports, otherwise all consequences are at your own risk.
If you want to use for water sports, then please order our MTSKR1905WF V3.0 IP67 waterproof remoteHere>
Specifications:
Model No.
MTSKR2005WF (MTSKR20WFV2)
Waterproof Rank
IP66 splashproof
Speed Display
Yes
Throttle and brake Display
±100%
Speed Mode
3 speed modes, each mode can adjust speed from 1%-100% throttle
Charger
QC 2.0 wireless
Display Screen
OLED yellow & blue screen
Throttle and Brake Signal Output Range
1.5ms-2ms for throttle;
1.5ms-1ms for brake
Voltage Display
Remote & main battery voltage level (lithium iron; lithium ion battery optional)
Telemeter Data by Receiver
Motor RPM; main battery voltage
Telemeter Data by VESC
ESC voltage/ current/ temp; Motor temp/ RPM
Triggers
2x high senstive triggers
Wireless Frequency
2.4GHz wireless with 40 channels
VESC Control Mode
Duty Cycle/ Current Mode
Travel Mileage
Yes
Receiver Built-in Switch for Esk8 Light / Esurf Water Pump
VESCTOOL/ Focbox/ Other PWM ESCs that has same signal output range with the remote
Application
Only for Electric skateboard, elongboard, mountainboard
Features:
1. Display speed (km/h or mph) in Esk8 mode (for electric skateboard) 2. Display voltage in V, current, temperature when work with VESC based controller
3. Display RPM (by 3 ways, hall sensor, VESC, motor wire)
If your surrounded has strong magnetic interference, the signal might easy get lost, suggest you order the version with 1m or 3m Extend Antenna Here >
Tips for Usage:
1. This remote only has Esk8 mode, and it's just normal waterproof, can only work for electric skateboard, please do not use for Esurf. 2. The receiver is not waterproof, please keep the receiver away from water, otherwise the receiver would easy to have short circuit problem. 3. Please attention when weld wire on the receiver or when using, each 2 pins do not touch each other, otherwise would easy to burn the receiver.
Go to the following Youtube Links to check the remote instruction videos:
2. BAT(Receiver) - Positive Pole (Main Battery): Display main battery bar;
3. Receiver TX & RX cross connect with VESC RX & TX: UART, can display speed and distance, also voltage, current, temperature values
4. Relay Switch: To control Pump
5. Transistor Switch: To control light
6. Any of the three hall wires to Hall port: Display speed and distance
7. Any of the three motor wires to MOT port: Display speed and distance.
Above shows 3 ways to display speed and distance, you can choose one way for connection if you need this function.
Above functions also need to combine with your settings in remote, just check manual and instruction.
Recommended and Related Products:
$0$76.90
×
In Stock Maytech MTSKT310DB 310mm New Truck Set with Motor Mount for Dual Belt-driven Skateboard Elongboard Truck Front and Rear Truck
Maytech MTSKT310DB 310mm New Truck Set for Dual Belt-driven Skateboard Elongboard Truck Front and Rear Truck
Model No.
MTSKT310DB
Product Name
Front and Rear Truck
Material
356-T6 Alloy Aluminum
Truck Size
9 Inch
Suitable Motor
5055/5065/6355/6365/6374
Related Products: (Click the following pictures to check more products)
Rear Truck for Dual Hub Motor:
Related Products: (Click the following pictures to check more products)
Maytech Brushless Outrunner Sensored Motors
Maytech VESC_TOOL Compitable VESC:
Maytech Fully Waterproof Remote MTSKR1905WF:
$0$112.90
×
In Stock MTS1810AS 180A Anti-spark Switch Protection for ESC Battery
MTS1810AS Anti-spark Switch with On and Off for Electric Skateboard/Mountainboard/Ebike/E-scooter/Fighting Robots/Lawnmower Robots
Maytech Anti-spark on-off power switch board MTS1810AS for VESCTOOL Compatible controller
Function: To protect your controller and battery, eliminate surge current when startup and speed up, because when startup and speed up surge current would be bery high, the antispark switch is protection function.
Anti spark on-off switch for electric skateboard, longboard, bike, scooter e.t.c. Same function as Vedder Anti-Spark.
This switch is a small, efficient, safe and reliable way to power on/off your DIY Electric Skateboard. When doing this, it also protects delicate components (such as the VESC or other ESC's) from unwanted power surges. This anti Spark Switch is recommended to anyone looking to build the ultimate DIY Electric Longboard.
Electric Skateboard Power Switch ON OFF DIY Switch Anti-Spark High Voltage High Amp 100A 6v-50v Electric Longboard.
Model No.
MTS1810AS
Dimension
48mm(L)*22.5mm(W) *5.0(H)
Current
180A
Voltage
50V
Power side Cable
10# 160mm Red and black
Switch Cable
30tin 160mmwith 4pin JR male plug
Related Products: (Click the following pictures to check more products)
Maytech MTSKR2005WF New Waterproof Remote for Esk8 Only with 3 Speed Modes
Maytech Brushless Outrunner Sensored Motors
Maytech VESCTOOL Compitable Controller:
$0$21.50
×
In Stock Brushless 6365 Sealed Motor 8mm Shaft Sensored 170/220KV
Maytech Brushless 6365 170KV Closed Cover Outrunner Sensored Motor 8mm Shaft IP54 Splash Waterproof for Electric Skateboard/Robots/Mountainboard MTO6365-170-HA-C
Model No
MTO6365-HA-C
KV
170/220
Idle Current
0.8A
Max Current
65A
Inpur Voltage
2-12s Lipo
Max Output Watt
3520W
Max Pull
9700g
Rated Current
60A
Motor Weight
760g
Shaft
8mm
Output Shaft Length
26mm
Internal Resistance
0.0402
Notice:
The motor has upgraded hall sensor embedded into stator, hall sensor board is more stable and motor has more precise positioning and smoother startup.
Printing on the motor case also has updated to with CE & ROHS symbol.
The upgraded version can work with previous version in same KV.
Stock Notice Before Place Order:
1. The motor 170KV is stock item, but stock is limited, so please confirm your order asap, or please contact usagnes@maytech.cnto check stock first if you need very urgently.
90KV and 220KV we do not make stock, lead time is about 35-50 days if you need this KV or other KV.
2. Shipping time is about 24 working hours after your order confirmed if the product you ordered is in stock, if not in stock, lead time is about 30-40 days.
3. Motor wire leads out position is specific, if wind one more circle or one less circle, the KV would differ much, hard to make exact KV, so each motor might has ±5%-10% tolerance, this is normal.
Related Products:(Click the following pictures to check more products)
Maytech MTSKR2005WF New Waterproof Remote for Esk8 Only with 3 Speed Modes
Maytech Brushless 6365 200KV Open Cover Outrunner Sensored Motor for Electric Skateboard/Robots/E-bike
Model No
MTO6365-HA
KV
200
Idle Current
0.8A
Max Current
65A
Inpur Voltage
2-12s Lipo
Max Output Watt
3520W
Max Pull
9700g
Rated Current
60A
Motor Weight
745g
Shaft
8mm
Output Shaft Length
26mm
Internal Resistance
0.0402
Stock Notice Before Place Order:
1. The motor is stock item, but stock is limited, so please confirm your order asap, or please contact usagnes@maytech.cnto check stock first if you need very urgently.
2. Shipping time is about 24 working hours after your order confirmed if the product you ordered is in stock, if not in stock, lead time is about 30-40 days.
3. Motor wire leads out position is specific, if wind one more circle or one less circle, the KV would differ much, hard to make exact KV, so each motor might has ±5%-10% tolerance, this is normal.
Motor Drawing:
Related Products: (Click the following pictures to check more products)
Maytech MTSKR2005WF New Waterproof Remote for Esk8 Only with 3 Speed Modes