Brushless 11270 Outrunner Watercooled Motor 12.5KW Sensorless
Brushless 11270 Outrunner Watercooled Motor 12.5KW Sensorless
Maytech MTO11270 Outrunner Sensorless Motor with Water-cooling 12.5KW Powerful Engine for Fighting Robots/Electric Skateboard/RC Car/Electric Surfboard/Efoil/RC Boat
|Model No.||MTO11270-180-SF||KV||180 (Max)|
|Max Current||430A||Input Volt||8-12S Lipo|
|Max Output Watt||12.5KW||Max Pull||15N.m|
The motor is not in stock, production time 40-50 days.
KV and sensor can be customized.
Notice before order:
1. This motor is not stock item, production needs at least 75-90 days, we will arrange production after your order confirmed.
2. Motor wire leads out position is specific, if wind one more circle or one less circle, the KV would differ much, hard to make exact KV, so each motor might has ±5%-10% tolerance, this is normal.
Related Products: (Click the following pictures to check more products)
Related Products: Click the following pictures to check specs
😍 Frequently Bought Together
- Maytech Waterproof 300A 14S 60V Watercooled ESC for Efoil Electric Surfboard Jetsurf
- In Stock Maytech IP67 Waterproof Remote MTSKR1905WF Controller for Esk8/ Esurf/ Efoil
- In Stock 2pcs / 5pcs MTS2009AS Max 300A 85V Anti-spark Switch with Short Cirsuit Protection
- In Stock Maytech Watercooled 85165 Sensorless Motor 10.5KW Brushless DC Engine for Esurf/ Efoil
- In Stock 12V 30W Water Pump 18-75V 40-160V Convert to 12V DC-DC Module UBEC Power Supply
Maytech Waterproof 300A 14S 60V Watercooled ESC for Efoil Electric Surfboard Jetsurf
Maytech MTSF300A-WP IP68 Waterproof 300A ESC 300A 85V Anti-spark Switch Water Pump Esurf Kit Speed Controller for Efoil/RC Boat
Upgraded Notice Since July 29, 2022.
Upgrade with waterproof junction box for wiring as below picture:
Receiver can be put in the junction box to be waterproof, too:
Please noted for usage:
Max ERPM recommended to use for the ESC is 50000.
ERPM = RPM x Motor pole pairs number
Related Products: (Clicking the following pictures to check specs)
1. IP67 Waterproof Esk8 Remote MTSKR1905WF:
2. Waterproof Watercooled Esurf/Efoil/RC Boat Kit:
3. Maytech Watercooled 300A ESC Not Waterproof:
Pre-order Maytech New Marine 32Bit 300A ESC IP68 Waterproof Smaller Size for Efoil Underwater Thruster Electric Surfboard
Pre-order Maytech New 300A 60V Waterproof ESC Smaller Size for Efoil Underwater Thruster Electric Surfbord
In Stock Maytech IP67 Waterproof Remote MTSKR1905WF Controller for Esk8/ Esurf/ Efoil
|Model No||MTSKR1905WF (V2), upgraded waterproof and signal strength|
|Waterproof Rank||IP67 with 2 layers nanometers coating|
|Control Mode||Esk8/ Esurf|
|Signal Format||Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%.|
|PWM Signal Output Range||1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode.|
|Double Source Power Supply||Accept 5V power by ESC built-in BEC or extra 5V power|
|Output Signal||Max 3.3V|
Remote and battery power, signal strength, throttle and brake percentage, RPM; speed, mileage; Current, voltage, temp when work with VESC
|Control Pump||Yes (Relay Switch)|
|Control Light||Yes (Transistor Switch)|
|Cruise Control||With in Esurf Mode|
|Brake||With in Esk8 Mode|
|Package Includes||Transmitter, receiver, charging Pad, receiver, wristband, 3pcs dupont cable|
|Compatible Controllers||VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote.|
|Application||foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc.,|
Features:1. Display speed (km/h or mph) in Esk8 mode (for electric skateboard)
2. Display voltage in V, current, temperature when work with VESC based controller
The remote has 2 Modes, signal output pulse width is different in 2 modes:
- Esurf Mode is 1ms-2ms, no stop no brake, if you use Esurf mode to work with VESCTOOL compatible controller, please use below settings in VESCTOOL and to match with the remote:
PPM Control Type: Current no reverse
PPM Mapping: Pulselength Start: 1.1ms; Pulselength End: 1.9ms; Pulselength Center: 1.5ms
Or you can use wizard mode to detect compatible value.
- Esk8 Mode is 1.5ms-1ms (Brake), 1.5ms-2ms (Speed up), 1.5ms is stop position.
Please noted to match compatible parameters for different modes in VESC_TOOL.
Tips After Using:
In Stock 2pcs / 5pcs MTS2009AS Max 300A 85V Anti-spark Switch with Short Cirsuit Protection
Maytech MTS2009AS Max 300A 85V Electronic Anti-spark Switch Battery Cutoff Switch with Short Circuit Protection for Electric Hydrofoil Efoil Surfboard
6-20S Lipo (25-85V), recommend better work under 75V
|96.5 x 56 x 25 (mm)|
Use NMOS to realize switching on/off Power positive
|Connector||With 4pcs Cold-pressed Terminal Connector|
|Function||Protect your controller and power supply system when brake or startup|
First Switch that can cut off positive pole power in the market;
Switch comes with LED light indicator;
|Application||Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, etc.,|
In Stock Maytech Watercooled 85165 Sensorless Motor 10.5KW Brushless DC Engine for Esurf/ Efoil
|KV||200, if you want other KV, contact firstname.lastname@example.org|
|Input Voltage||6-12S Lipo (25-50V) for 200KV, 6-16S Lipo (25-67V) for 150KV|
|Max Output Voltage||10.5KW|
|Shaft||Screw Shaft, other shaft can be customized, contact us|
|Hall Sensor||Without, if you want hall sensor, contact email@example.com|
|Motor Pole Number||10|
|Waterproof Rank||Not waterproof, watercooled version, can't work underwater directly|
|Customize||KV, logo, shaft, cable, connector, etc., contact Email: firstname.lastname@example.org|
In Stock 12V 30W Water Pump 18-75V 40-160V Convert to 12V DC-DC Module UBEC Power Supply
Maytech 12V 30W Water Pump 18-75V 40-160V Convert to 12V DC-DC Module UBEC Power Supply Comb for Electric Surfboard Efoil Jetski
UBEC 1: 18-75V Input DC Convert to 12V Output DC
If you use voltage from 18-75V voltage, please choose this option.
UBEC 2: 40-160V Input DC Convert to 12V Output DC
If you use voltage from 40-160V voltage, please choose this option.
If you order the water pump together with UBEC, we will solder the UBEC to the water pump for your convenient to use:
Electric Surfboard Kits