In Stock Maytech Updated V3.0 IP68 Waterproof Remote MTSKR1905WF Controller for Esk8/ Esurf/ Efoil
In Stock Maytech Updated V3.0 IP68 Waterproof Remote MTSKR1905WF Controller for Esk8/ Esurf/ Efoil
Normaler Preis
$99.90 USD
Normaler Preis
Verkaufspreis
$99.90 USD
Stückpreis
/
pro
Specification:
Model No | MTSKR1905WF (V3.0), Latest version with upgraded signal, waterproof and display functions |
Waterproof Rank | IP68 with 2 layers nanometers coating |
Control Mode | Esk8/ Esurf |
Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
Output Signal | Max 3.3V |
Display |
Remote and battery power, signal strength, throttle and brake percentage, RPM; speed, mileage; Current, voltage, temp when work with VESC |
Control Pump | Yes (Relay Switch) |
Control Light | Yes (Transistor Switch) |
Safety Button | Support |
Cruise Control | With in Esurf Mode |
Brake | With in Esk8 Mode |
Wireless Charging | Yes |
Package Includes | Transmitter, receiver, charging Pad, receiver, wristband, 3pcs dupont cable |
Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., |
Updated functions:
- Add 3 speed modes options:
You can adjust max throttle % from 20-100% good for beginners
- Stronger Signal and optional
Remote and receiver signal strength is enhenced to avoid some signal interference nearby, and with 2 levels signal strength optional in the remote, level 1 weaker signal but save power, level 2 stronger signal more consumption.
- Better Waterproof Performance:
- Compatible with Maytech new MTSF300A-WP32 ESC
- Display Voltage in %
Can display voltage %, so you can know when it's low voltage and charge in time
- Throttle Lock Function
Add throttle lock function, you can set lock time from 10-30s, safer to use
- Firmware is wirelessly upgradable.
> Get E-Manual: Remote Manual and Instruction
> Check Video Using Instruction
Click Here: How to Display Volt, Current, RPM with TX and RX?
The remote has 2 Modes, signal output pulse width is different in 2 modes:
- Esurf Mode is 1ms-2ms, no stop no brake, if you use Esurf mode to work with VESCTOOL compatible controller, please use below settings in VESCTOOL and to match with the remote:
PPM Control Type: Current no reverse
PPM Mapping: Pulselength Start: 1.1ms; Pulselength End: 1.9ms; Pulselength Center: 1.5ms
Or you can use wizard mode to detect compatible value.
- Esk8 Mode is 1.5ms-1ms (Brake), 1.5ms-2ms (Speed up), 1.5ms is stop position.
Please noted to match compatible parameters for different modes in VESC_TOOL.
If your surrounded has strong magnetic interference, the signal might easy get lost, suggest you order the version with 1m or 3m extend antenna.
Tips After Using:
In order to avoid being corroded by sea water and to extend the remote life, please wash the remote in fresh water after using; Also please charge when the remote all dry.
Related Products: Click the pictures to check specs
Esk8 Products: Brushless Motors
Fully Water Efoil/Esurf/Boat Kit with Inrunner Brushless Motor+Remote MTSKR1905WF+300A ESC
Share
0
Artikel gesamt
$0.00
Produktzwischensumme
Alle 0 Artikel aus deinem Warenkorb entfernen?