Maytech IP67 Waterproof Remote MTSKR1905WF Controller for Esk8/ Esurf/ Efoil
Noted about package box:
The package box may not with Maytech logo as below picture, with logo box and no logo box is randomly used:
Item: MTSKR1905WF (V2)
Waterproof Rank: IP67 with 2 layers nanometers coating
Control Mode: Esk8/ Esurf
Signal Format: Standard PWM (PPM), output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%.
PWM Signal Output Range: 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode.
Double Source Power Supply: Accept 5V power by ESC built-in BEC or extra 5V power
Output Signal: Max 3.3V
Display: Remote and battery power, signal strength, throttle and brake percentage, RPM, speed, mileage; Current, voltage,
Firmware Updatable: Yes
Control Pump: Yes (Relay Switch)
Control Light: Yes (Transistor Switch)
Set Safety Button: Yes
Cruise Control: With in Esurf Mode
Brake: With in Esk8 Mode
Wireless Charging: Yes
What comes in the package: Charging Pad, receiver, wristband, 3pcs dupont cable
Compatible Controllers: VESCTOOL Compatible/ Focbox/ Other PWM ESCs that has same signal output range with the remote.
Application: Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc.,
The remote has 2 Modes, signal output pulse width is different in 2 modes:
- Esurf Mode is 1ms-2ms, no stop no brake, if you use Esurf mode to work with VESCTOOL compatible controller, please use below settings in VESCTOOL and to match with the remote:
PPM Control Type: Current no reverse
PPM Mapping: Pulselength Start: 1.1ms; Pulselength End: 1.9ms; Pulselength Center: 1.5ms
Or you can use wizard mode to detect compatible value.
- Esk8 Mode is 1.5ms-1ms (Brake), 1.5ms-2ms (Speed up), 1.5ms is stop position.
Please noted to match compatible parameters for different modes in VESC_TOOL.
Tips After Using: