Maytech.cn
Maytech DIY Foil Boost Kit with 5KW 6384 Waterproof Motor + 160A 32Bit Waterproof ESC + V3 MTSKR1905WF Waterproof Remote
Maytech DIY Foil Boost Kit with 5KW 6384 Waterproof Motor + 160A 32Bit Waterproof ESC + V3 MTSKR1905WF Waterproof Remote
Prix habituel
$539.90 USD
Prix habituel
Prix promotionnel
$539.90 USD
Prix unitaire
par
Frais d'expédition calculés à l'étape de paiement.
Impossible de charger la disponibilité du service de retrait
Application:
DIY foil assist on wing foil, wind surf foil, sup foil board, kite foil, underwater thruster, sup foil assist, paddle assist, wind foil board, sup board, downwind, hull cleaning device, underwater rov, underwater cleaning robot, boat cleaner, quariums or submerged environments, tank cleaning, underwater drone, etc.,
Aiming to convert non-electric foil boards to electric foil easily with reasonable cost.
1. 6384 waterproof motor
| Model No | MTO6384-140-WPC Motor |
| KV | 140, can customize, contact agnes@maytech.cn if you want other KV |
| Idle Current | 0.8A |
| Max Current | 70A |
| Rated Current | 100A |
| Input Voltage | 3-12S Lipo (12-50V) |
| Max Output Watt | 5kW |
| Shaft | No output shaft |
| Hall Sensor | Without |
| Waterproof Rank | IPX8 |
| Cable Length | 1m |
| Bearing | Stainless steel bearing |
| Customize | KV, logo, shaft, mounting hole pattern, color, connector, cable, etc. contact agnes@maytech.cn |
2. MTSF160A-WP32 160A 32Bit IP68 Waterproof ESC:
Model No.: MTSF160A-WP32
Waterproof Rank: IP68
Cont Current: 160A
Peak Current: 180A
Input Voltage: 6-14S Lipo (25V-60V)
With 5V/0.5A BEC
32BIT Micropprocessor
With progcard32
3. MTSKR1905WF IP67 waterproof remote
| Model No | MTSKR1905WF |
| Waterproof Rank | IP67 double waterproof |
| Thr Mode | ESURF (SF) and ESK8 (SK) |
| 3 Speed Modes | With, adjust throttle % from 20-100% |
| Power Modes | 2 levels, Eco (Level 1) < Pro (Level 2) |
| Throttle Lock | Yes, 10-30S optional |
| Signal Format | Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%. |
| PWM Signal Output Range | 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode. |
| Double Source Power Supply | Accept 5V power by ESC built-in BEC or extra 5V power |
| Output Signal | Max 3.3V |
| Display Parameters |
Current, voltage, temperature only when work with VESC or Maytech MTSF300A-WP32 ESC; |
| Control Pump | Yes (Relay Switch) |
| Control Light | Yes (Transistor Switch) |
| Safety Button | Support |
| Cruise Control | With in Esurf Mode |
| Brake | With in Esk8 Mode |
| Accessories | Wirelss charging pad / Receiver / USB cable / Wristband / 3pcs Dupond cable |
| Compatible Controllers | VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote. |
| Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., |
> Get E-Manual: Remote Manual and Instruction
> Check Video Using Instruction
Click Here: How to Display Volt, Current, RPM with TX and RX?
Stock Notice Before Place Order:
1. The motor 140KV is in limited stock, so please confirm your order asap, or please contact us agnes@maytech.cn to check stock first if you need very urgently.KV can be customized, if you want to customize, we can do for you, please contact us for the KV you want.
2. Shipping time is about 24 working hours after your order confirmed for stock item, if not in stock, lead time is about 30-40 days.
3. Motor wire leads out position is specific, if wind one more circle or one less circle, the KV would differ much, hard to make exact KV, so each motor might has ±5%-10% tolerance, this is normal.
Related Products:
