Maytech.cn
In Stock 1 to 4 PWM Signal Expansion Conversion Board Can Control Max 4 Motors with 1 Remote / Throttle
In Stock 1 to 4 PWM Signal Expansion Conversion Board Can Control Max 4 Motors with 1 Remote / Throttle
Couldn't load pickup availability
If you want to use other cheaper but slower shipping method, please contact agnes@maytech.cn
Shipping time by DHL or UPS is fast, normally 3-7 days arrive to you.
In Stock Signal Expansion Converter Board Support to Sync Four ESCs / VESCs Controlled by One Remote / Throttle
The outlook, size and wire color may vary for different production batch, Please refer to the actual product you receive.
Application: Compatible with Maytech MTSKR1905WF, MTSKR2005WF Remote; Work with VESC/ ESCs for electric skateboard, elongboard, efoil, foil assist board, tow boogie, dual motor jet surf, jet board, electric boat, etc.,
Why we make this PWM Signal Expansion Converter Board?
Based on some customers reflection and needs, they need to sync use 2 or more ESCs/VESCs and need to be controlled by one remote/ throttle.
Normally if you need to control two or more ESCs/ VESCs by one remote controller or throttle, you may parallel connect ESCs/VESCs signal wire or use canbus cable, but canbus cable could only connect max 2 VESCs, and if parallel connect signal wire there's risk of damage pm ESC/ VESC caused by insufficienct power supply or interference to power chip for ESC / VESCs with BEC.
Strengths of our Signal Expansion Converter Board:
1. You can sync max 4pcs ESCs/ VESCs at the same time and control them by one remote / throttle, converts receiver PWM output into 4 isolated channels to prevent ESC damage caused by direct parallel signal cable connection.
2. Easy connection, you just need to connect signal wire from your ESCs / VESCs to the sockets, much easier than parallel connect signal wire, and much safer.
3. It will automatically selects the highest voltage from 4 ESC signal cables to power the receiver, avoid potential damage from 5V parallel-connected BEC circuits.
4. Integrated protection circuits on all 4 outputs prevent interference from external pulse signals to the receiver board.
VESCTOOL Compatible Speed Controllers:
